garage doors

GDP1018
DEC: Center Hinge
Thickness:1.8mm
For use with 11mm diameter roller
Finish: zinc plated...

DEC:open HOOK
GARAGE DOOR INSTALL PARTS
Finish: Zinc plate

Commercial adjustable hinge
Bright zinc plated steel
14GA roller carrier
14 Ga base plate
mounting holes on 3" center vertically...

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

GDP1020
DEC: Central Hinges
Thickness:2.50mm
For use with 11mm diameter roller
Finish: zinc plated

GDP1017
DEC: Center Hinge
Thickness:1.8mm
For use with 11mm diameter roller
Finish: zinc plated

1#Hinge
GDP1004
DEC:1#Hinge
Thickness:1.8mm
For use with 11mm diameter roller...

EXHAUST PORT
LATCHING TYPE
USE ON NON INSULATED DOOR PANELS
3" INSIDE DIAMETER
FASTENERS & GASKETS ...

EXHAUST PORT
USE ON INSULATED DOOR PANELS-2" MAX, THICKNESS
3" INSIDE DIAMETER
INCLUDES FASTENERS & GASKETS
POLISHED ALUMINUM FINISH

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

18 GAUGE HINGE # 2
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

DEC: Ferrule
For use with fixing bearing
Parts used in garage door, overhead door, residential garage door, commercial garage door, industrial garag

Cable size
3/32"7X7
1/8"7X7
1/8"7X19
5/32"7X19...

2" 11 BALL NYLON TIRE ROLLER WITH ZINC PLATED STEM
4" STEM ( WORKING LENGTH=3 1/4" ) ,BULGED SHOULDER
WHITE NYLON TIRE FOR QUIET OPERATION

For Overhead Garage Door, Industrial Garage doors, Residential garage doors,Commercial garage door parts, sectional garage door parts, Rolling garage

DEAD BOLT DIECAST CASE
100 KEY CODES AVAILABLE
POWDER COATED ZINC CASE
COMPLETE WITH REQUIRED MOUNTING HARDWARE
QUALITY 5 PIN TUMBLE

Cable size
3/32"7X7
1/8"7X7
1/8"7X19
5/32"7X19...

Adjust Bracket
DEC:Adjust Bracket
Thickness:4.0mm
Finish:zinc plated

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

Side Hinges
Thickness 2.0mm
for use with 11 mm diameter rollers
Zinc Plated finished

All kinds of torsion springs andextionsion springs
adope time quality spring
quenching treatment
different kinds of doors adopt different springs

DEC:4" Pulley
The pulley is made of 2 times 1.2mm cold rolled
steel riveted together,6 rivets proportionally spaced
lnner ring heat treated

DEC:Residential Inside Slide Latch
Include cases,bar,spring and screws
Case:2mm steel. Bar:4mm steel
The center line of the fixing holes is 8

PUSHER SPRINGS 15"
12 GAUGE BRACKET WITH MOUNTING SLOTS
ZINC PLATED STEEL TOTAL LENGTH: 15".6" COMPRESSION

Description: Porosity Bottom Bracket
The bracket has left and right sides
Thickness:2.3 mm, Finish: zinc plated

4#Hinge
GDP1004
DEC:3#Hinge
Thickness:1.8mm
For use with 11mm diameter roller...

Residential Top brackets
For use with double track door and suitable for 11mm shaft
Thickness:2.5mm
Finish:zinc plate

Adjustable top rollers
top bracket with rollers
bright zinc plated 12 Gauge, 2" 11 ball nylon rollers
roller rating :75 lb load@15000 12" door cycl

USE ON NON INSULATED DOOR PANELS
3" INSIDE DIAMETER
INCLUDES FASTENER & GASKETS

2" 10 BALL STEEL ROLLER WITH ZINC PLATED STEMS
4" STEM ( WORKING LENGTH=3 1/4" )
BULGED SHOULDER