fuse terminal block

Clips: Stainless steel
Pin header:Tin-plated brass
Housing:PA66.UL94V-0
Max soldering:+250℃ for 5 sec
Temperature range:-40 - +105 ℃

Screw:M3,Zinc-plated steel
Pin header:Tin-plated brass
Wire guard:Ni-plated phosphor bronze
Housing:PA66.UL94V-0
Max soldering:+250℃ for 5 s

Screw:M3,Zinc-plated steel
Pin header:Tin-plated brass
Wire guard:Ni-plated phosphor bronze
Housing:PA66.UL94V-0
Max soldering:+250℃ for 5 s

Pin Header: Tin-plated brass
Temperature range: :-40 - +105 ℃
Max Soldering: +250 ℃ for 5seconds
Withstanding voltage: AC1250V/1Min

Screw:M6,Ni-plated steel
Terminal:Ni-plated brass
Housing:PA66.UL94V-0
Withstanding voltage:AC2500V/1Min
Temperature range:-40℃ to 105℃

Pin header:Tin-plated brass
Wire guard:Ni-plated phosphor bronze
Housing:PBT.UL94V-0
Max soldering:+250℃ for 5 sec.
Torque:0.4Nm(3.5 lb.in)

1 . Material: Housing-ABS UL94V-2
Base-ABS UL94V-2
Contact -0.5mm thickness
Phosphor bronze plating over nickel over silve

fuse terminal block
material:PA
wire range:2.5-4.0mm2
poles:2/3p

 
750V 32A, T

 Screw Fuse Spring Terminal Bl

1.Fuse terminal block KF100, its pitch is 10.0mm.
2. screw called one pin. we could proudce 2pins to 10pins .
3. It got CE certification.

Item: Rotation Module
Part No.:GT-7006(10 pairs)
Description:
1、Insulation Resistance ≥50000 MΩ
2、Dielectric Strength ≥500V(AC voltage,5 0 Hz for

Material:
Housing: 30% Glass filled PBT UL94V-0
Contacts: Brass or Phosphor Bronze
Plating: Selective gold plated: gold plated on mating area an

1)Plastic base:PA66 UL 94-V2;
2)Copper Part: brass H59,Nickle-plated;
3)Screw: M3-M3.5,Steel Zinc-plated;
4)Voltage rating:380/400V
5)Cur

 
Green - Yellow 2 - Conductor Ground  Spring Cage Terminal Blocks With 2 Poles SP2

1.electrical connector terminal block 2EDGK.
2.pitch is 5.08mm.
3.It is Female .
4.It often work together with KF2EDGV/CV, KF2EDGR/CR

1.screw pcb terminal block 126V
2. its pitch is 5.0mm. Screw type have cross and flat type.
3.there are ROHS and not ROHS.

1. PCB terminal block 128V
2. Pitch have 5.08 /5.0/7.50/7.62MM
3. It could proce 2p and 3p .
4. It has CE , UL and VDE certification

1.Plug-in terminal block 2EDGK
2. work together with male 2EDGV/CV,2EDGCR/R.
3. Pitch is 5.08/5.0mm .
4.Material is Pa66 /Brass

1.Screw terminal block 127
2.Pitch is 5.0mm
3.It is 300V 10A.
4. 2p and 3p could work together
5.Housing hegith 10.0m, width 8.4mm

1.PCB terminal block 306
2.Pitch is 5.0mm
3. there are CE and UL certification
4.We often produce 2p and 3p .
5.it is 300V 12A

When you need the best possible wiring connections to your printed circuit board but you are under cost constraints, then the Automation Systems ..

1 Screw pcb terminal block 126V
2.pitch is 5.0mm. color is green and black. it got UL, CE, VDE certification .
3 we could produce 2-24p

1.Screw terminal block 635 , it got CE, UL, VDE and ROHS certifaction.
2. we could put 2pin and 3pin together. Housing material is PA66

1.Pluggable terminal block 2EDGKA.
2.pitch is 5.08/5.0mm ,it work with male 2EDGV/CV,2EDGCR/R.
3.Its direction different 2EDGKB.

pluggabble terminal block 15EDGVC, it is male, with female 15EDGK work together. its pitch is 3.50/3.81/5.0/5.08mm and vertical type (180 degree)

1.screwless terminal block 250A,
2. its pitch is 3.5mm
3.there are A and B type.
4. We could produce different color .

1.spring terminal block 141V,
2. It got UL, CE, VDE and ROHS certifications.
3.It could put more pins together.
4. UL and CE

1.screw terminal block 128D.
2. pitch has 5.08mm.
3.its rated current is 10A and voltage is 300V.
4.it often work together with KF128G.

1.Screwless terminal block 390
2.Pitch is 5.0mm
3.it often white snap and gray body. we could produce different color .
4. 22-18AWG