flygt pump mechanical seals

TS21-3.375 85.73 114.3 133.35 55.55 117.5 18.3 19.9
TS21-3.500 88.9 117.48 136.53 55.55 120.65 18.3 19.9
TS21-3.625 92.08 120.65 139.7 58.72 123.8

STATIONARY RING: CERAMIC/SIC/TC
ROTARY RING: CARBON/SIC/TC
SECONDARY SEAL: NBR/EPDM/VITON
SPRING&METAL PARTS: STEEL

Stationary Ring(Ceramic/SiC/TC)
Spring & Other Parts(SUS304/SUS316)

Replace JOHN CRANE TYPE 8B2 SEAL. This seals work In Mechanical Pump Seal D574518. armstrong pumps mechanical seal.It raplacement flowserve RA seals

Pressure: within 0.8Mpa
Speed: within 10m/s
Temperature: -20 to 150 degree celsius
Medium: water, oil and weakly-corrosive mediums, etc.

Mechanical Seals Rings
It has a wide application scope and high interchangeabliblity

Plug-In Seal, 90mm, for pump code 3301, 5150.350 .Flygt Plug-in Seals feature two independent mechanical seals mounted in a single,ready-to-install.

Used in water pumps, submersible pumps and sewage pumps, etc.
Pressure: within 1Mpa
Speed: within 10m/s
Temperature: -30℃~200℃

Features
Stationary springs
Balanced
Independent of direction of rotation
Independent of pressure direction

size: 20mm
fit for the pump code 4620
T05VC PLUG-In seal FLYGT 4610 PUMP REPLACEMENT SEAL
stainless steel parts plug flygt cartridge seals.

OPERATING LIMITS:
1.Pressure: 1Mpa
2.Speed: 10m/s
3.Temperature: -30℃~200℃

industrial mechanical pump seals
Secondary Seal(VITON/PTFE+VITON)
Spring & Other Parts(SUS304/SUS316)

single spring o ring mounted semi cartridge seals with threaded hex-heads to suit Grunfos PUMP CR&CRI series centrifugal pumps. CR1, CR3, CRN1, CRN15

Bellow type mechanical seals
Operating Conditions:
Temperature:-30℃~200℃
Pressure: ≤1.2Mpa
Speed: ≤ 12 m/Sec

medium: water, oil and other low corrosive mediums, etc
Pressure: within 0.8Mpa
Speed: within 10m/s
Temperature: -20~150 degree celsius

replacement the original pump 2201-430,2201-320/2201-480 seals. our parts are specifically developed or selected to work perfectly in flygt pumps

Combined Materials:
Stationary Ring (Ceramic/SiC/TC)
Rotary Ring (Carbon/SiC/TC)
Secondary Seal (NBR/EPDM/Viton)
Spring and Metal Part (Steel)

1. double mechanical seal
2. used in sebmersible pump, sewage pump
3. made in china

Pressure: p = 12 bar (174 PSI)
Temperature:
t = -20 °C ... 160 °C (-4 °F ^ +320 °F)
Sliding velocity: ... 20 m/s (66 ft/s)
Viscosity: ... 300 Pa

Flygt mechanical seals are usually used in the Swedish ITT Flygt mixer. They are one of the essential Flygt pump parts for Flygt pumps.

used for water pumps

Combined Materials
Stationary Ring (Carbon / Sic / TC)
Rotary Ring (Carbon / Sic / TC/ SUS304)
Secondary Seal (NBR / EPDM / Viton)
Spring and Punc

Upper and lower 25 mm shaft size seals for use together, but available separately, to suit various A.B.S.® submersible pumps

Applied for submersible pumps and sewage pumps, etc.
Pressure: within 0.35Mpa
Speed: within 6m/s
Temperature: -20 to 100 degree celsius

Introduction:Operating limits
Pressure:≤1.2MPa
Temperature:-60℃~180℃
-20℃~230℃
Linear speed:≤25m/s

used in water pumps and other equipments

The Mechanical Seals Suit ABS AFP Series pumps ,XFP series pump ,AF/AFP series pump Enquivalwnt with Burgmann MS30/ MS32 seal. Replace AES W014/W014U

Advantages
For high or low temperature applications
Features
Single seal
Balanced...

Seals suit for MR166A PUMPS. Rotating part with carbon face.
Designed to meet the hygienic requirements of the dairy, food and beverage

medium: water, oil and other low corrosive mediums, etc
Pressure: within 0.8Mpa
Speed: within 10m/s
Temperature: -20~150 degree celsius