flange ball bearings

These bearings have contact angles between the rings and balls. The standard angles are 15°\25°\and 40°.

1.Material:bearing steel
2.Structure:Thrust
3.Type:ball
4.Bore Size:440 mm, Outside Diameter:540 mm, Width:80mm
5.Model Number: 51106

Model:51108
Inside Diameter:40mm
Outside Diameter:60mm
Thickness:13mm
Net Weight :0.12kg...

good quality,competitive price
rich stock,quick delivery
sample available
Seals Type: steel sealed
Type: Ball Bearing

high precision, long life, low noise
material:high chrome, carbon steel, stainless steel,etc,
Retainer:copper cage, nylon retainer, steel retainer

deep groove ball bearing mainly take radial load as well as take moderate axila load.with less conefficient of fricient of friction,high limiting spee

Deep Groove Ball Bearing
1.High precision
2.Excellent quality
3.Short delivery time
4.Model:open,Z,ZZ,RZ,2RZ,2RS,RS

Self-aligning ball bearings are constructed with the inner ring and ball assembly contained within an outer ring that has a spherical raceway

we are a bearing manufacturer and bearing exporter from

Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no cage design, the bearing able to install more ceramic

High Speed Low Noise Ball Bearings
1. Professional Technology
2. Strict Quality Control
3. Fast Delivery

generally we also could make the cage with GFRPA66-25, PEEK, PI, phonemic textiles tube, etc. Compares than the material of ZrO2.

1.High speed
2.Seals Type: OPEN ZZ 2RS RS
3.Widely use and fast delivery
4.ID:15 - 110 mm
5.OD:35 - 200 mm

Angular contact ball bearings have raceways in the inner and outer rings which are displayed with resect to the direction of bearing axis.

Precision tolance:P0-P5 (ABEC1-ABEC5)
Radial clearance: C0-C5
Vibration(acceleration and speed):Z1-Z4 & V1-V4 1
Size: id XoD X B/ Metric . 6x17x6

 
Sin

Support of axial load in one direction only
Adjustment against a second bearing is necessary
High rigidity and loadingcapacity

we can offer single direction thrust ball bearings and double direction thrust ball bearings,and also 29 series.

Seal Type: Double Shielded (open is also available)
Bore Diameter (d): 6 mm
Outer Diameter (D): 10 mm
Width (B): 3 mm

These bearings have a contact angle which enables them to withstand significant axial loads in one direction together with radial loads.

Thrust ball bearings mainly applicable to such vehicle steering mechanism, machine tool spindle, rubber and plastics machinery.

ID size 23mm-32mm-10mm
Cage material Nylon , steel , brass
Precision: PO P6 P5 P4
Hardness: 60-65
Clearance: C2, C0, C3

1) Model: Open, Z, ZZ, RZ, 2RZ, RS, 2RS
2) good quality in competitive price
3) delivery in on time

Deep Groove Ball Bearing
1. High Precision
2. Good Quality, Competitive price
3. OEM Service available
4. Quick delivery

Productivity:2Million/Month;Packing:Industrial Packing,OEM;Transportation:By Sea,Air;DeliveryDate:30-40days;PaymentType:L/C,T/T;Trademark:CCF

Productivity:2Million/Month;Packing:Industrial Packing,OEM..;Transportation:By Sea,Air…;DeliveryDate:30-40days;PaymentType:L/C,T/T;Trademark:CCF;Spec

Productivity:2Million/Month;Packing:Industrial Packing,OEM..;Transportation:By Sea,Air…;DeliveryDate:30-40days;PaymentType:L/C,T/T;Trademark:CCF;Spec

used for miniature deep groove bearings
Material:Gcr15(SAE 52100) Grade:G10 Diameter: 2.0-6.35mm
HRC:62-66

Deep groove ball bearing are produced to higher precision than the ISONormaltolerances.The dimensional accuracy corresponds to P6 tolerances.

1. Spec No.SS 6202 2RS
2.Material: stainless steel
3.Structure:Deep Groove
4.Type:Ball
5.Standard:ISO9001