filling water machine

Carbonated Water Filling Machine
1,Usage:Carbonated Drink,Cola
2,Model: DCGF24-24-8
3,Capacity:8000~10000bph

plastic pet water bottle production machine
1.High speed:11000bph,two step stretch blow molding equipment.
2.Max volume:<=600ml

 
Automatic 1 Tons Water Purifyin

 
Automatic 1 Tons Water Purifyin

1.Screw diameter:80mm
2.Width of production line:33m
3.L/D:22:1
4.Extruder:SJSZ80/156

5 Port 2 position pneumatic air solenoid valve guide type single coil NBR thread NPT BSP
4v210-08;
5 port;
110v ,220v ,24v 12v.

Pneumatic water well drilling machine should be used together with air compressor, it can add mud pump and foam pump

PET mineral water bottle making machine
1.Max Output:1200-1300bph,<=5000ML.
2.Requires labors to put performs into preheater.

 
 
12KW 5 Gallon

pneumatic air filter pressure regulator high quality smc type with pressure guage copper filter cartridge
1.AW series ;
2,Manual or auto drain

It is mainly suitable for drilling water wells, agricultural irrigation wells, geothermal air conditioning holes and other wells

 
Fully Automatic Juice Filling M

 
Fully Automatic Juice Filling M

PC 3 gallon extrusion blow moulding machine,water barrel
Specially for 3 gallon and 5 gallon water barrel and lamp cover with PC Material.

water bottle blowing machine manufacturing line
1.Max Output:1200-1300bph,<=5000ML.
2.Requires labors to put performs into preheater.

2 way brass water solenoid valve pipe timer for drain valves 12v 24v 110v 220v
timer control;
brass pipe contact;
water pressure.

1.Pipe material:PE/HDPE
2.Diameter:900-1600mm
3.Main motor power:450kw
4.Output:1500kg/h
5.Line speed:0.03-0.5m/min

mineral water bottle blow molding machine
1.Max Output:1200-1300bph,<=5000ML.
2.Requires labors to put performs into preheater.

It is widely utilized and featured in high power and hoisting load(2T), large torque transmission,With hydraulic automaatic feeding device

Union connector copper water fitting female brass joint for solenoid valve pumps
1.famale to female ;
2,BSP NPT ;
3.copper .

1.Pipe material:PE/HDPE
2.Diameter:900-1600mm
3.Main motor power:450kw
4.Output:1500kg/h
5.Line speed:0.03-0.5m/min

PET blowing machine of mineral water bottle
1.Max Output:3000-3300bph,<=600ML.
2.Low rejection rate,stable running and easy operation.

2/2 mini solenoid valve low pressure gas direct acting 230v 120v 1bar VITON
NPT,BSP;
0-1bar;
brass.

Our drilling rigs are widely used in water well drilling,geological exploration,construction building exploration,river dam construction

PET stretch moulding machine for mineral water bottle
1.Max Output:1000-1200bph,<=2000ML.
2.Low rejection rate,stable running and easy operation.

2 way pilot diaphragm type water solenoid valve nomally open 16bar VITON NPT BSP IP65
normally open;
ss304;
brass.

This is widely used and hydraulic feeding , which has the characteristics of large power, large lifting force (2T) and high transmission torque

pet moulding machine for mineral water bottle
1.High speed:2800-3300bph,<=2000ML.
2.Easy installation and starting.

is mainly used to drilling wells,irrigation wells,ground source heating pump wells and boreholes for other purposes,especially for mountain and rock

BW150 mud pump has the advantages of compact construction, light weight, readily movable and easy to be operated etc.