extruder screw twin

General Purpose Twin Screw Barrel Size 80-156mm

  Expanded Polystyrene Foam Sheet Extru

  <span style="font-size:14p

Capacity: 2~1200m³/h
Outlet Pressure: 0.1-2.5MPa
Inlet Pressure: -0.08~0.8MPa
Temperature of medium: -20~120°C
Viscosity of medium: 0.5~10000mm²/s

Twin screw rubbing drying machine.
- Axle Patented
- Capacity: 500 ~ 600 kg/hr
- Sensor to stop material input when reached maximum capacity

This Commercial double-screw juicer machine is designed for squeezing juice from fermented grape skin and other fruits with high fiber content.

Twin-screw extruding and sheeting machinery,China Dispersion kneader, Rubber kneader, Dispersion mixer, China Mixing mill, Open mill

Gentle molding design guarantees the quality of the matter.Very much dependale valid design theory guaranteed the dependable operation of extruding. T

Main Engine:
1. Screw and barrel are made of SACM-1 with heat and nitride treatment, each treatment is being carefully controlled. Given this, o

The pumps is used for tranferrinng viscous liquids such as HFO, bitumen/asphalt and molasses.

1.Bimetallic screws and barrel
2.Material:alloy steel 38CrMoAlA alloy steel
3.ISO 9001:2008 approved
4.treatment :Nitriding treat

1.double conical screw barrel
2.Material:alloy steel 38CrMoAlA alloy steel
3.ISO 9001:2008 approved
4.treatment :Nitriding treat

1.Recycling waste,reusing again.
2.Beautiful decorative board.
3.High efficient and capacity.
4.Enviroment friendly.
5.Highe profit,low cost.

1)Apply to world-top brand extrusion lines
2)Raw material:High quality 38CrMoAlA/4140/SKD61
3)large numbers of drawings provided

1.Apply to Battenfeld Cincinati Weber KMD
2.Approved ISO 9001:2008
3.End products:WPC,proflie, pipe film etc.
4.Granule/foaming

1.parallel twin screws and barrel
2.Material:alloy steel 42CrMo(AISI 4140)
3.ISO 9001:2008 approved
4.treatment :Nitriding treatment,heat-treatment

1.Cincinati screw and barrel
2.Certificates:GBT 19001-2008/ISO9001:2008/SGS
3.SJSZ,KMD,Weber,Cincinati,Battenfeld,ect
4.Competive price

PP Crusher Machine Screw Barrel with High Precision

Parallel Co-rotating Custom Screw Barrel Making Bottle Machine

PVC tube extrusion machinery which is specially designed for producing PVC tube.
1.Max.production speed:12m/min
2.pipe range:20-630mm

All Screw Barrels are manufactured from High Quality steel with Highly finished, Ground or Honed Bores and having Nitrogen Case Hardened Surfaces maki

Parallel twin screw barrel
Dia 60-150mm
material : 38CrMoALA, SACM645, SKD61
Surface hardness: HRC58-62
Heat treatment:Nitriding 96 hours

Specification:
1. Parallel Bimetallic Twin Screw And Nitritding Cylinder barrel
2. The screw and barrel can be customized.

180mm parallel twin screw barrel element screw segment barrel

Material 38CrMoA
Technics: Milling
Heat Treatment: Nitriding 96 Hour
Hardness of Nitration: HRC 56-58
Surface Roughness: Ra 0.4um...

Material 38CrMoA
Technics: Milling
Heat Treatment: Nitriding 96 Hour
Hardness of Nitration: HRC 56-58
Surface Roughness: Ra 0.4um...

Material 38CrMoA
Technics: Milling
Heat Treatment: Nitriding 96 Hour
Hardness of Nitration: HRC 56-58
Surface Roughness: Ra 0.4um...

Conical Vented Twin Screw Barrel
1.Optimum performance
2.Good service
3.45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, etc

Screw Diameter: 35mm-200mm
Length: Less than 10000mm
Barrel diameter: 35mm-200mm
Material: 38CrMoAlA; SKD61; SKD11; 40Cr; 42CrMo; High quality allo

1.Professional design
2.High quality alloy steel: 38CrMoALA
3.Heat-treatment:Nitrided
4.Hardness:≥900Hv