electric heating tube

medium wave infrared heater lamps
1.Temp of heating element: 800-950℃
2.Response time is 1 minute
3.warranty time : 20000 hours

1. Peak Wavelength range: 0.75-1.4um
2. Response time: 1s
3. Max Temp: 850-950℃
4. Filament Material: Tungsten

medium wave infrared heater lamps
1.Response time is 1 minute
2. energy saving
3.warranty time : 20000 hours

shortwave infrared lamp
1.diameter of quartz tube : 23*11mm
2.voltage&power: 115v 400w
3.overall length: 410mm
4. average life: 5000 hours

1.Carbon medium wave golden infrared heater lamps
2.Applied industry: Screen printing Drying machine
3.Peak wavelength: 2.4-2.7um

1. Quartz infrarred tube heating element.
2. Applied industry: Film stretching machine
3. Carbon Peak wavelength: 2.4-2.7um.

1. heating filament: Ni-Cr or Fe-Cr-A1 resistance wire
2. IR wavelength between 2-4 um
3.Operating temperature 900° C
4.Response time around 1 min

Glass Tube:99.9% Pure Fused Silica Quartz Sealed
Filament Material:Tungsten
Filament Temperature:1800 - 2400C℃(3300 - 4400F)
reaction time:1s

medium wave infrared heater lamps radiation can be absorbed by the surface of the heated material, for plastic, glass and especially is water

medium wave infrared heater lamps radiation can be absorbed by the surface of the heated material, for plastic, glass and especially is water

medium wave infrared heater lamps
1.Response time is 1 minute
2. energy saving
3.warranty time : 20000 hours

1.Carbon heat element infrared quartz heating elements
2.Application: Plastic floor heating module
3.Lamp length1520mm/element length 1400mm

single Shortwave infrared heating lamps
1.Diameter: 10mm,12mm,13mm,15mm,18mm,20mm
2.Length : 90mm - 4000mm
3.Power : 100-6000W
4.Voltage: 12-480v

single Shortwave infrared heating lamps
1.Diameter: 10mm,12mm,13mm,15mm,18mm,20mm
2.Length : 90mm - 4000mm
3.Power : 100-6000W
4.Voltage: 12-480v

Twin tube medium wave quartz heating tube
1.Cross section: 33*15mm
2.Coating:Golden/Ceramic White
3.Function: for glass laminating

Shortwave quartz tube IR heating tube
1. Voltage:80-600V
2. Power:300-12000W;
3. Applied Industry: Selective soldering machine

1.Heat is applied precisely where and only for required
2.infrared radiation requires neither contact nor intermediate transfer medium
3.clean

1. Peak Wavelength range: 0.75-1.4um
2. Response time: 1s
3. Max Temp: Temp of heating element: 1800-2400℃
4. Filament Material: Tungsten

Carbon element infrared heating tube
1. Quartz tube purity: 99.99%
2. Function of gold coating: reflector
3. Max Temp: 850 Degre C.

Quartz glass infrared heating tube
1.Can be run with on-off switch frequently;
2.Satisfy the heating requirement of glass heating or fast drying.

Carbon fiber infrared heating tube
1. Peak Wavelength range: 2.4-2.7um;
2. lifetime: 10000 hours;
3. Max Temp: 800 Degree C.

Our electric heating tubes are used for heating up water,oil,air,gas,chemical,etc

shortwave infrared heater lamps with reflector can save more energy and help clients to realize the good result in a shorter time.

Cabon fiber infrared heating tube
1. Fast response in 10 seconds;
2. Energy-saving compared with Medium wave heating;

Advantages of heating elements
1.long life;
2.fast heat exchange rate;
3.quick temperature rising;
4.longer transfer of heat radiation.

tube shrinking machine for heating elements from leading heater machines factory in China, welcome to contact us for heater machines any time.

Used for steel tube heating,annealing, hardening, tempering, hardening and tempering

1.Envirnment friendly, simple structure,assemble easily. 2.Safe use is assured, no accidental risk. 3.Other favorable colors are optional.

tube skinning machine for heating element from leading heater machines factory in China, we make quality heater machines for heaters.

tube filling machine for heating elements from leading heater machine factory in China. Feel free to contact us for heater machines any time.