elastomer

Elastomer Bellow Seals John crane type 1B
temperature:-20℃ to +120℃
Pressure:<<1.2Mpa
Speed:<<15m/s

Applied for centrifugal pumps, agitators and other industries.
Pressure: within 1.2Mpa
Speed: within 12m/s
Temperature: -30~200 degree celsius

Single elastomer bellows rotating seal. Unbalanced. High flexibility due to extended selection of materials. Replace Burgmann MG9 type seal.

For blower pump, diving pump, circulating pump mechanical seal

We will supply with our best professional service to customers.
If you have any interest in our products, please do not hesitate to contact us

Elastomer Bellow Seals John Crane type 21
temperature:-20℃ to +120℃
Pressure:<<1.0Mpa
Speed:<<15m/s

Applied for centrifugal pumps, agitators and other industries
Pressure: within 1.2Mpa
Speed: within 12m/s
Temperature: -30~200 degree celsius

elastomer bellow mechnical seals. Equivalent to John crane type1A. used in Clean water, sewage water, oil and other moderately corrosive fluids.

For industrial pump, replace the mechanical of Burgmann and John Crane mechanical seal

If you have any interest in our products, please do not hesitate to contact us,We will supply with our best professional service to customers.

Elastomer Bellow Seal CR150A
belong to type 150.
temperature:-40℃ to +150℃
Pressure:<<1.2mpa
Speed:<<15m/s

Used in water pumps, submersible pumps and sewage pumps, etc.
Pressure: within 1Mpa
Speed: within 10m/s
Temperature: -30℃~200℃

GW1B mechanical seal, for blower pump, diving pump, circulating pump, replace the mechanical seal of John Crane 1B. Single seals.

for blower pump, diving pump,circulating pumpp, replace the mechanical seal of Burgmann MG901

Elastomer Bellow Seals John Crane type 1A .
temperature:-20℃ to +120℃
Pressure:<<1.4Mpa
Speed:<<15m/s

medium: water, oil and other low corrosive mediums, etc
Pressure: within 0.8Mpa
Speed: within 10m/s
Temperature: -20~150 degree celsius

For use in pumps, mixers, blenders, agitators,refrigeration compressors, blowers, fans and other rotary shaft equipment.Equivalent to John crance type

Water Pump Seals. Coolant pump seal primarily utilised in combustion engine water pumps. Equivolent to john crane type 6A seal.

TB2 mechanical seal,diving pump,circulating pump, replace the mechanical seal of John Crane 2(US)

Elastomer Bellow Seals CR10R.10T
temperature:-20℃ to +120℃
Pressure:<<0.5mpa
Speed:<<10m/s

GW301 replace brugmann BT-AR SEAL.
small seal for large pump series", a mechanical seal for mass produced water pumps.

used in submersible pumps and multi-stage deep well pumps

for blower pump, diving pump,circulating pump, replace the mechanical seal of Burgmann MG920

Elastomer Bellow Seals CR BIA
temperature:-20℃ to +120℃
Pressure:<<1.0mpa
Speed:<<15m/s

TCI tricone bit
1.Covers almost all IADC codes.
2.Reliable bearing and Lubrication syste
3.Meet with API Spec7-1 Standard

We produced hundreds of all kinds of high quality membrane and composite products,

we are specializing in Die casting/Sand Casting/Investment Casting/automobile parts/Machining Parts/mechanical seal

1 The special non-slip studs offer excellent traction on ice and snow
2 Walk naturally with the crampons

Applied for submersible pumps and sewage pumps, etc.
Pressure: within 0.35Mpa
Speed: within 6m/s
Temperature: -20 to 100 degree celsius

Description
Elastomer Bellow Shaft Seals(TSC1):
Mediums: Water, oil, and weakly-corrosive mediums