elastomer bellows seals

Single spring mechanical seal type CR560A
temperature:-20℃ to +120℃
Pressure:<<1.0Mpa
Speed:<<15m/s
media:clean water, sewage water, Oil and oth

STATIONARY RING: CERAMIC/SIC/TC
ROTARY RING: CARBON/SIC/TC
SECONDARY SEAL: NBR/EPDM/VITON
SPRING&METAL PARTS: STEEL

Equivalent to John Crane Type 502 ELASTOMER BELLOW SEALS

Whether you need new seal or you have a seal to be repaired, we welcome the opportunity to help you with your rotary sealing needs.Rubber bellow seal

For use in pumps, mixers, blenders, agitators,refrigeration compressors, blowers, fans and other rotary shaft equipment.Equivalent to John crance type

1. excellent resistant-corrosion
2. high mechanical strength
3. high thermal conductivity
4.good self-lubrication,small expansion

Speed:≤15m/s Because of more than twenty years experiences, we become one of the leading manufacturers of die casting and mechanical seals in china

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded,Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide

Elastomer Bellow Seals John crane type 1B
temperature:-20℃ to +120℃
Pressure:<<1.2Mpa
Speed:<<15m/s

Used in water pumps, submersible pumps and sewage pumps, etc.
Pressure: within 1Mpa
Speed: within 10m/s
Temperature: -30℃~200℃

We will supply with our best professional service to customers.
If you have any interest in our products, please do not hesitate to contact us

Elastomer Bellow Seals John Crane type 1A .
temperature:-20℃ to +120℃
Pressure:<<1.4Mpa
Speed:<<15m/s

Applied for centrifugal pumps, agitators and other industries.
Pressure: within 1.2Mpa
Speed: within 12m/s
Temperature: -30~200 degree celsius

If you have any interest in our products, please do not hesitate to contact us,We will supply with our best professional service to customers.

single seals, Unbalanced,
This mechanical seal is one of the most commonly used for corrosion resistant pumps. Equivalent to JC10T

john crane type2100k mechanical seals. a compact, unitized, single spring, elastomer bellows mechanical seal ,replace AES BO5 seals. sterling 540

Elastomer Bellow Seals CR BIA
temperature:-20℃ to +120℃
Pressure:<<1.0mpa
Speed:<<15m/s

Elastomer Bellow Shaft Seals

Applied for centrifugal pumps, agitators and other industries
Pressure: within 1.2Mpa
Speed: within 12m/s
Temperature: -30~200 degree celsius

for blower pump, diving pump,circulating pumpp, replace the mechanical seal of Burgmann MG901

Single elastomer bellows rotating seal. Unbalanced. High flexibility due to extended selection of materials. Replace Burgmann MG9 type seal.

Elastomer Bellow Seals John Crane type 21
temperature:-20℃ to +120℃
Pressure:<<1.0Mpa
Speed:<<15m/s

Used in water pumps, submersible pumps and sewage pumps, etc.
Pressure: within 1Mpa
Speed: within 10m/s
Temperature: -30℃~200℃

TB2 mechanical seal,diving pump,circulating pump, replace the mechanical seal of John Crane 2(US)

elastomer bellow mechnical seals. Equivalent to John crane type1A. used in Clean water, sewage water, oil and other moderately corrosive fluids.

we are the manufacture that producing all kings of seal like that O-ring mechanical seals series ,Elastomer Bellow shaft seals ,Grundfos mechanical se

Elastomer Bellow Shaft Seals

Elastomer Bellow Seal CR150A
belong to type 150.
temperature:-40℃ to +150℃
Pressure:<<1.2mpa
Speed:<<15m/s

for blower pump, diving pump,circulating pump, replace the mechanical seal of Burgmann MG920

medium: water, oil and other low corrosive mediums, etc
Pressure: within 0.8Mpa
Speed: within 10m/s
Temperature: -20~150 degree celsius