elastomer bellows seals

1. OEM service
2. Quality assurance
3. Delivery rate.
4. Competitive price

Productivity:2000Sets/Month;Min. Order:10 set;Packing:individual packs;Transportation: by sea or by air;DeliveryDate:20days;PaymentType:TT or others;

Seal face: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B), Silicon carbide (Q1)
Seat: Silicon carbide (Q1, Q2),

Elastomer Bellows Mechanical Seals
Equivalence to Burgmann Type MG1,MG12,MG13,MG1S20

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded,Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide

WB2 Elastomer Bellow mechanical seal
most common and low priced used for simple and non-critical applications
having single spring

Elastomer Bellow Seals CR70
temperature:-30℃ to +200℃
Pressure:<<0.6mpa
Speed:<<15m/s

1.Stationary Ring:ceramic/SIC/TC
2.Rotary Ring:carbon/SIC/TC
3.Secondary Seal:NBR/EPDM/VITON
4.Spring&Metal Parts:SUS304/SUS316

Water Pump Seals. Coolant pump seal primarily utilised in combustion engine water pumps. Equivolent to john crane type 6A seal.

Elastomer Bellows Mechanical Seals

Stationary Ring:Silicon Carbide Sintered Pressureless,Ceramic(Alumina)

ISP C2100 elastomer bllow mechanical seal
the same as the original item;

GW301 replace brugmann BT-AR SEAL.
small seal for large pump series", a mechanical seal for mass produced water pumps.

Elastomer Bellow Seal CR6
temperature:-20℃ to +120℃
Pressure:<<0.5mpa
Speed:<<10m/s
clean water, sewage water, Oil , moderately corrosive fluid

used in submersible pumps and multi-stage deep well pumps

If you are used to use the die casting and mechanical seal, then our goods must be meet your requirements.
Stationary Ring:Ceramic(Alumina),Silicon

Design features:Elastomeric bellows seal design including kinds of statconary ring , complying with DIN24960 and ISO3069 , combined with P60 , P50 ,t6

For many water-based applications, such as wastewater treatment, potable water, HVAC, Pool & Spa, and other general applications.

single spring mechanical seal CR24
Equal:burgmann type MG912
with 5 kinds of lengths
temperature:-20℃ to +120℃
Pressure:<<1.0mpa...

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded,Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide

Single elastomer bellows rotating seal. Unbalanced. High flexibility due to extended selection of materials. Replace Burgmann MG9 type seal.

Secondary Seal:Fluorocarbon Rubber(Viton),Ethylene Propylene(EPDM),Nitrile(NBR)
We can supply kinds of casting parts,mechanical seals

Elastomer Bellow Shaft Seals

Elastomer Bellow Seal 301 water pump seal
temperature:-20°C to+120°C
pressure:<=0.6MPa
speed:<=10m/s

Applied for submersible pumps and sewage pumps, etc.
Pressure: within 0.35Mpa
Speed: within 6m/s
Temperature: -20 to 100 degree celsius

Design features:Elastomeric bellows seal design including kinds of statconary ring , complying with DIN24960 and ISO3069 , combined with P60 , P50 ,t6

FBD series pump seal. Single seal . FBD mechanical seal series is uneasy to be blocked because of its
single spring structure.

1. excellent resistant-corrosion
2. high mechanical strength
3. high thermal conductivity
4.good self-lubrication,small expansion

Features
Rubber bellows mechanical seal
Unbalanced
Single spring
Independent of direction of rotation...

Because of more than twenty years experiences , we become one of the leading manufacturers of die casting and mechanical seals in China