drawn steel

In the process of the production , the operation is conducted rigidly as ISO 9001:2000 Quality System with domestically advanced production management

cold drawn steel 52100
1: produce 2.0-80mm cold drawn rod/wire
2: have all devices for producing.
3: welcome to visit!
4: good reputation se

Cold Drawn Steel Tube 6mm Outside Diameter
1. BK,BKS,NBK
2. High precision on OD&ID steel tube
3. Ra<0.8micron

1.O.D:13.7MM-610MM
2.W.T:2MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

1.O.D:13.7MM-610MM
2.W.T:2MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

1) Certificate: ISO9001:2000
2) Mill standard:DIN2391/ASTM/EN10305-1/GB8163/JIS
3) Steel Gr.: St35, St45, St52
4) Delivery condition:BK /BKS /NBK

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

Products used in metallurgy, cement, petroleum, chemicals, ceramics and other industrial kilns and a variety of bridges, tunnels, highways and other c

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

Dimensions and tolerances according to standard ASTM A450
Roughness<0.8micron
DIN EN10305 E235+N, St37.4
Seamless cold drawn Steel hydraulic tubes

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

OD6+/-0.05mm
ID1.6+/-0.05mm
used for high pressure diesel engines
Seamless Cold Drawn Steel Tube St30Al

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

1.O.D:13.7MM-610MM
2.W.T:2MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

Standard: EN 10305-1
Size(mm): O. D.: 6.0-224.0 W. T.: 1-15 L: Max 12000

Fouded in 1999, Zhejiang Zitic Industrial Components Co.,Ltd. is a professional manufacturer of deep drawn parts, especially precision deep drawn part

1.O.D:20MM-219MM
2.W.T:0.5MM-11.75MM
3.LENGTH:5.8M,6M
4.SURFACE:ZINC COATING
5.STANDARD&MATERIAL:BS1387,Q195,Q235,Q345

1.Type:seamless steel pipe
2.Absolute high quality
3.ISO9001:2008 ,API 5L
4.OD;21-1220 mm
5.WT:2-160 mm

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

1.ground rod is applying 99.95%pure copper on low carbon steel by electroplating.
2. high tensile strength
3.bending without cracks

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

Features:
1) Different sizes available
2) Materials: 37Mn5/ST52/SAE1045/SAE1020
Outer packing:
Seaworthy packing

Steel Flat is width 12-300mm\thickness4-60mm\Rectangular cross section for and slightly with the edge of the pure steel.

Cold-drawn steel bars.
Specification: from 2mm to 120mm, Dia. 5mm - 150mm
Manufacturer approved by GL, BV, KR, ABS, DNV, NK, LR, CCS AND RINA.

Specifications:
1) Heat treatment: stress relieved, normalized, or cold finished
2) Standards: ASTM
3) Continuous stenciling as per requirement

The cold drawn steel pipe is used for mechanical structure, hydraulic equipment, high dimensional accuracy and surface finish, good precision cold dra