double row cylindrical roller bearings

The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can beused to float on the stationary s

The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can beused to float on the stationary s

The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can beused to float on the stationary s

The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can beused to float on the stationary s

TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer asapre-set as

Size range:ID 25.400 mm to 1200.150mm(1.000 in.to 47.2500 in.)
OD 30.480 mm to 2460.000mm(1.2000 in.to 96.8504 in.)

Double Row Tapered Roller Bearings
Doublecone and two single cups, with or without a cup spacer.
Furnished as amatched assembly.
Cups ground to

Double Row Tapered Roller Bearings
Demension: 317.5*422.275*128.587mm, Weight: 50.2kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Double Row Tapered Roller Bearings
Demension: 244.475*327.025*92.075mm, Weight: 21.4kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Double Row Tapered Roller Bearings
Demension: 203.2*276.225*95.25mm, Weight: 14.8kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Double Row Tapered Roller Bearings
Demension: 346.075*488.95*174.626mm, Weight: 109kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Double Row Tapered Roller Bearings
Demension: 346.075*488.95*174.626mm, Weight: 111.2kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Cylindrical rollers have linear contact with the raceway,and the bearings can carry heavier load.

TQO (Straight Bore Four-Row Assembly)
TQOW (Straight Bore with Cone Face Lubrication Slots)
TQIT (Tapered Bore Four-Row Assembly)

Cylindrical roller bearings NUP5232M
Demension: 160*290*98.425mm, Weight: 30.6kg.
Shape location tolerance should be to current standard

Thrust Cylindrical Roller Bearing, Roller Bearing, XSY bearing, High Precision Bearing

Cylindrical roller thrust bearings are suitable for arrangements that have to support heavy axial loads.

100% new and made by SQT
It had tasted by machine.
Warranty is 3 months
Final drive bearing
High quality and rich stock

Double Row Tapered Roller Bearings
Applications
Gear reduction units
Cranes
Calendar rolls...

Cylindrical roller bearings NU2056EMA
Demension: 280*420*82mm, Weight: 40.6kg.
Shape location tolerance should be to current standard

Dimension(mm):127*182.562*76.2
Weight:6.47kg

(1) Cylindrical Roller Bearing
(2)high precision long life low noise less vibration
(3)ISO9001:2000
(4)good service

material quality:Chrome Steel ,stainless steel
The grades of our products are P0, P6, P5, P4, and P2

Double Row Tapered Roller Bearings
Demension: 346.075*488.95*174.626mm, Weight: 112.7kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Double Row Tapered Roller Bearings
Demension: 355.6*514.35*146.05mm, Weight: 88.8kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Double Row Tapered Roller Bearings
Demension: 127*234.95*142.875mm, Weight: 26.1kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Double Row Tapered Roller Bearings
Demension: 127*317.5*146.05mm, Weight: 40.1kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Double Row Tapered Roller Bearings
Demension: 127*182.562*93.66mm, Weight: 7.31kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Double Row Tapered Roller Bearings
Demension: 30.005*88.9*50.8mm, Weight: 1.94kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Double Row Tapered Roller Bearings
Demension: 127*206.375*107.95mm, Weight: 12.8kg.
SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;