double check valve

1. One or two actuator ports for leak free closure, optional
2. Vertical stacking assemblies
3. ISO and NFPA standard mounting

Bronze Y-strainer check valve with stainless steel filter.

Bronze swing check valve with bronze body and bonnect, brass swing.

Check valve

Modular Throttle And Check Valve MSA
MSA-03-X
MS:Model
A:Control line A:A line B: B line T: T line W: A.B. lines
03:Port size...

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

-With or without leakage port
-With or without pre-opening
-Type with pre-opening, dampened decompression
-3 opening pressures
-Subplate mounting

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

B62-C83600 Bronze Welded Swing Check Valve1.Pressure:150LB 200LB 300LB
2.Media: sea water,oil,liquefied gas,steam.
3.Temperature: water below 120℃

The valve which is called Angle brass safety valve,the function is control pressure safe ,it's used for compressor valve.

Size: 2" ~ 24" (DN50 ~ DN600)
Rating: ANSI 150lb-1500lb
Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel
Trim: API600

LCAH series pilot-controlled check valve
Fluid Temp:-20~70
Pressure:31.5(Mpa)

Wafer Lift Type Check Valve

1.Prompt reply
2.Bulk quantity
3.Manufacturer
4.ISO9001:2000
5.OEM Service

1.Prompt reply
2.Bulk quantity
3.Manufacturer
4.ISO9001:2000
5.OEM Service

1.Prompt reply
2.Bulk quantity
3.Manufacturer
4.ISO9001:2000
5.OEM Service

hydraulic operated check valve
bsp3/8 male thread
working pressure 320bar
burst pressure 0.04~0.1MPa

LCDY Series pilot relief check valve
Fluid Temp:-20~70
Pressure:31.5(Mpa)

1. Pressure: 3000/6000psi
2. Male thread or Female thread
3. Port size:1/4",1/2", 3/4",1"
4. Material: SS304, SS316, brass

Size: 1/2" ~ 2"(DN15 ~ DN50)
Rating: ANSI 150lb ~ 2500lb
Body Materials: A105,LF2,F9,F11,F22,F304,F304L,F316,F316L,F321,F51 etc.

Class 150~600,
size: NPs 2~12″
Basic Design: AsME B16.34, Bs 1868
Face
to Face Dimensions: AsME B 16.10...

Lined PFA Ball Check Valve
1) Size 2" Up to 48", Class 150-2500
2)Face to Face API609
3)End Connection: RF...

1/2" ~ 2" Brass Sewing Check Valve (ZH1720)
1) Size: 1/2" ~ 2"
2) Environment Temperature: -20~ +120℃
5) Guarantee: 10 years

Brass Spring Check Valve with Stainless Steel Mesh (ZH1731)
1) Size: 1/2" ~ 2"
2) Environment Temperature: -20~ +120℃
5) Guarantee: 10 years

.Control on and off of pipe system through adjust hand knob
.Long working time

high temperature valve,high pressure valve.