directional hydraulic valve

1.The most economical power hydraulic valve components
2.Use of safe, reliable, stable performance, low working temperature

hitachi excavator parts HPV116 hydraulic parts
swing motor parts
piston
plate valve
center pin 4177926 8036381

Solenoid operated directional Valve
Maximum operating pressure: 31.5(spool type 60 is 25.0)
Maximum flow: 120L/Min

1. Pure iron magnetic materials for high-quality electrical
2. With good permeability and work performance
3. As per standard of JB/T 5244-200

komatsu solenoid valve
apply to : PC120-6 PC200-6 PC210-6 PC220-6 PC240-6 PC250-6 PC300-6 PC400-6 PC450-6
part number: 702-21-07010

Flow Control Valves Throttle valve
model: 6 8 10 12 16 20 25 30 40
maximum pressure(Mpa) 31.5

1. Can be manually controlled
2.With over-current protection device
3. Main performance parameters obtained under experimental conditions

Nok seal, hydraulic cylinder seal kit
excavator boom seal, excavator seal kit
Komatsu seal kit
apply to : pc120-6 pc200-5 pc200-7 pc120-5 pc300-5

hydraulic components ball valve
2 way manifold mounting
high pressure 315bar
carbon steel material

Direct-action proportional directional valve
specification:02,03
Maximum pressure:31.5 Mpa
Maximum flow:17L/min (DN6),50 I/min(DN10)

1.Fine rigid raw materials
2.Standard heat treatment for good service life
3. 100% tested before delivery

3 way ball valves
high pressure 5000psi
bsp female thred
steel/stainless material

3-way high pressure ball valve (carbon steel)
Ball seals:DELRIN (POM)
Temperature Range:-20ºC+100ºC/-4ºF+212ºF

kato excavator parts
kato relief valve for HD700

1.Fine rigid raw materials
2.Standard heat treatment for good service life
3.100% tested before delivery

high pressure ball valves
2 way male thread
full port dn20
PN 31.5mpa

Flow control valve needle valve
model: 6 8 10 12 16 20 25 30 40
maximum pressure(Mpa) 31.5

1.Fine rigid raw materials
2.Standard heat treatment for good service life
3. 100% tested before delivery

hyundai stop solenoid
hydraulic shut off valve
3991625

high pressure ball valves
two way full port
male thread light type
PN 31.5mpa

1.Fine rigid raw materials
2.Standard heat treatment for good service life
3. 100% tested before delivery

komatsu solenoid valve
excavator solenoid valve
apply to : pc120-5 pc120-6 pc200-5 pc200-6
part number: 708-2H-25420 708-2H-25420-25240 708-23-182

1.Fine rigid raw materials
2.Standard heat treatment for good service life
3.100% tested before delivery

Restrictive check valve for flow control
model: 10 12 16 20
maximum pressure(Mpa) 31.5

hydraulic check valve dn12
PN 500bar
DN 12mm
40LPM

1.Fine rigid raw materials
2.Standard heat treatment for good service life
3.100% tested before delivery

high pressure 315 bar hydraulic valve ball
Ball seals:DELRIN (POM)
Temperature Range:-20ºC+100ºC/-4ºF+212ºF

1.Fine rigid raw materials
2.Standard heat treatment for good service life
3.100% tested before delivery

1.Fine rigid raw materials
2.Standard heat treatment for good service life
3. 100% tested before delivery

hydraulic components ball valve
2 way manifold mounting
high pressure 315bar
carbon steel material