cutters

Label cutting machine Adjustable feeding length, with automatic feed counting function, high efficiency, low noise, small size, light weight

1. Adopt Swiss technology, solid construction
2. Imported alloy steel blade, sharp and durable
3. With measuring scale and safety protection device

Cable cutters are used for underground cable installation and pulling operation. The cutters are mechanical ratchet type or hydraulic type.

different types of tool holders wth morse taper No.2#~5#,50~100mm D.O.C.,with or without internal cooling,pilot pins, adaptors,arbor, extension
etc.

1.Pneumatic operation
2.Fast to cut sample, easy and simple to operate
3.Different die can be selected
4.Widely used
5.Durable cutting pad,die

1. White and red color, nice appearance
2. Alloy structure, more durable
3. It's wide used in plastic industrial, such as plastic pipe, profile etc.

Wires Cutter
Plate Cutter
Mesh Cutter
Maxillofacial, Neurosurgery & Vet Orthopedic Instrument
For cutting 0.6mm titanium meshes and plates

1. Cutter body uses Aluminum alloy shaped by extrude molding
2. With screw to adjust height of blade
3.High quality cutting blade

One-touch shank HSS cutter for FEIN magdrill
Diameter: 12-50mm (1/2" -- 2")
Cutting length: 25mm, 50mm, 75mm (1", 2" 3")
Material: M2AL, M35

Diameter: 12-50mm (1/2" -- 2")
Cutting length: 25mm, 50mm, 75mm (1", 2" 3")
Material: M2AL, M35

1.Pneumatic operation
2.Fast to cut sample, easy and simple to operate
3.Different die can be selected
4.Widely used
5.Durable cutting pad,die

Cutting machine high-power acoustic transducer, easy to cut off the thick, thin material, the cutting surface is smooth without burr.

Hydraulic Conductor Cutters are used for cutting ACSR conductor, OPGW cable or ground wires. It is widely used in overhead transmission line working

1.Different cutting width can be selected
2.It adopts lever principle, power-free, manual operation, labor-saving,

Thread shank HSS Annular Cutter
D.O.C.: 50mm, 2"
Cutter Diameter: 12-65mm (7/16"-- 2-9/16")
Suitable for FEIN/Hitachi magdrills,other machines

5.5mm Ratcheting Rod Cutter
Spine Fixation Instrument
Orthopaedic Instrument
Material: SUS630 stainless steel
OEM Service

1. It is manual operation
2. It is easy tooperate
3. It is durable and beautiful.

Weldon shank TCT Hole Annular Cutter
Diameter from 14-150mm
D.O.C.:35, 50, 75,100MM (1-3/8", 2", 3", 4")
for machine like Hougen Janey, Alfra

Thread shank TCT Hole Annular Cutter
Diameter from 14-150mm
D.O.C.:35, 50, 75,100MM (1-3/8", 2", 3", 4")

KC35 K-wire Cutter for Veterinary Orthopedic Use
Material:German Stainless Steel
General Orthopaedic Instruments
OEM service is available

1. Manual operation
2. Easy to operate
3. It's durable and handsome

Wire Cutter with TC for Veterinary Orthopedic Use
Material:German Stainless Steel
General Orthopaedic Instruments
OEM service is available

One touch shank HSS annular cutter
Diameter: 12-50mm
Length: 25mm, 50mm, 75mm (1", 2",3")
Material: M2AL, M35

HY4011 Profile Sample Cutter is used to make sample of plastic board, pipe and profile and other non-metallic material

Cannulated Pin Cutter for Veterinary Orthopedic Use
Material:German Stainless Steel
General Orthopaedic Instruments
OEM service is available

FEIN Quick-In Shank TCT Annular Hole Cutter
Diameter from 14-65mm
D.O.C.:35MM (1-3/8")
for FEIN Quick-In magdrill

1. Rigid structure, sharp blade, easy to exchange
2. Can cut 12 pcs of strips at the same time
3. Smooth sample edge, no defect

Wire Tighter with Cutter for Veterinary Orthopedic Use
Material:German Stainless Steel
General Orthopaedic Instruments
OEM service

Rotary Carbide Burrs Cylinder with End Cutter
Sizes:2-3-4-6-8-10-12-16mm

Cranio-Maxillofacial Instrument
Trauma Orthopaedical Instrument
Cannulated Wire Cutter
18cm,7 1/2''
For cutting wires and plates of distractors