cutlery stainless steel

Diameter: 15-1/4 inch
Pitch: 19
# Blades: 3
Rotation: RH
Material: Stainless Steel...

Size : 1/2"NB TO 80"NB IN
Schedule: SCH20, SCH30, SCH40, STD, SCH80
Type : Welded / Fabricated
Length : Single Random, Double Random & Cut Length

Machinery manufacture: Glass machinery, agricultural machinery, textile machinery, papermaking machinery, food machinery, electrical equipment

ASTM A312 Austenitic Stainless Steel Pipe
Standard:ASTM,JIS,GB,DIN
Specification:6~2032*0.5~40mm
Grade:316,316L,304,304L
Length:5-5.8m, 6m,11.8m

Standards: ASTM A312/A789/A554A/EN10216-7
Process method: TIG Welded
Surface Finshing: Annealed/pickling /bright
Sizes: OD: 6-20320MM, W. T0.9-50MM

Min order quantity: 1 metric tons or upon negotiation
Delivery date: Min. 10 days and negotiation
Packing: Plastic bag in bundles or wooden cases

Stable quality:coming from good materials and technic
Lower price:not cheapest but the lowest at the same quality
Good service:Satisfactory service

Wear-resistant: durable without scratches, never rust, never broken.
High temprature resistance: application for maximum temperature of 650 degrees

Surface: Pickling, annealing, polishing, bright, sand blast, hair line, etc.
Ends: Plain Ends or Beveled Ends
Kinds payments: L/C,T/T,D/P,D/A

Test Certificate:
Manufacturer Test Certificate
Laboratory Test Certificate from Govt. Approved Lab
Under Third Party Inspection

Test Certificate:
Manufacturer Test Certificate
Laboratory Test Certificate from Govt. Approved Lab
Under Third Party Inspection

We strive to be the best in our industry.
We care about our customers, our suppliers and partners.
We do our absolute best to honor our commitments.

1. Visual and Dimensional Checking
2. Chemical Composition Test
3. Mechanical Properties Test
4. 100% RT
5.Hydro Static Test or 100% NDE Test

IGC Test (Inter Granular Corrosion Test)
Micro-Structure Analysis
Macro
Radiography Test
Ultrasonic Test...

Size
6MM OD - 219.8MM OD
Thickness
0.71 MM - 3.25 MM THK
Specification...

Materials:
1.4404,produced according to DIN EN 10312
Manufacturer length:
6 m.
Suitable: ...

TEMPER:ANNEALED & HARD DRAWN
SMALLEST O/D:0.012"
LARGEST O/D:6"
WALL THICKNESS RANGE:0.004" - 0.375"
CUT RANGE:ANY LENGTH NO MATTER HOW SHORT

1/2" to 5" Diameter.
0.049"-0.250" Wall thickness
180,240,320,400,600, and (Polish and Buff)
All Material Produced to ASTM A-554 Specification

A554:
Standard specification for welded stainless steel mechanical tubing
(round, square, and rectangular tubing for structural applications)

Types of Packaging:
- Bundles (hexagonal)
- Wooden Boxes
- Crates (steel/wooden)
- Special crates for U-Bend tubes with each radius separated

Type: As Welded, EFW, ERW
Grades: 304, 304L, 304H, 321H, 321, 316, 316L, 316Ti, 310S, 347, 347H, UNS31803 Duplex
Size: 1/8" NB to 36"NB

UNS 32750 material is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel. The high molybdenum.

Micro structure Analysis
Grain size examination
Polishing Machine
Electro Etching Machine
Inverted Metallurgical Microscope

Benefits of UNS32750 Pipe:
Improved corrosion resistance in comparison to Duplex
Greater tensile and yield strength
Good ductility and toughness

Duplex 2205 is used in environments where resistance to general corrosion and chloride stress corrosion cracking is important.

Welded pipes is carried out on sophisticated tube mills where the cold roll stainless steel strips are welded into tubes in a fully automatic process.

Tubing surfaces are available bright annealed or mechanically polished ID to 20 μ-in Ra(0.5 μm)maximum and/or OD polished to 30μ-in Ra(0.8 μm)

GANYEAH is also having the facility to supply tubes with lower residual stress values, which plays an important role in service life of Heat Exchange

The surface treatment is usually pickling or bright annealing. The polishing level is as follows: 180 # 320 # 400 # 600 # 400 #.

All technical data of each inquiry must be evaluated by company professional expert and get confirmation by our cooperation mill.