copper nickel wires

Permalloy wire mesh/screen is a soft magnetic alloy wire with exceptionally high magnetic permeability.Mesh: 0.05-250mesh Thickness: Min0.05mm.

Ni32Fe wire mesh is a Nickel-Iron alloy that is used for applications where magnetic shunts are used for temperature compensation.
Mesh:0.5-250mesh

Ni50Fe Nilo wire (SMA50) possesses a very high saturation flux density of any Nickel-Iron alloy.Wire:Diameter:0.03mm-10mm. Used in laminated cores.

Nichrome 60/15 has good deformation ability thermal stability, mechanical character, resistance to high temperature, oxidation corrosion 0.05mm-10mm

Nickel Wire Mesh is weaved of nickel wire. The main characteristics is high temperature resisting (1000℃) acid resisting. It is a melting process.

High Quality Nickel Wire Mesh/ Screen for Fuel Cell:Purity:>99.6%, applied in fuel cell as electrode and catalyzer. High thermostability & purity

Nickel chromium alloy Ni80Cr20 Mesh/Screen: anti-corrosion, melting point of about 1400 °C (2552 °F).Carrier or conveyor belt used in high temperature

Incoloy alloy 925 wire is a precipitation-hardenable nickel-iron-chromium alloy with additions of molybdenum and copper. Diameter: 0.05mm-10.0mm.

Ni50Fe wire (SMA50) possesses a very high saturation flux density of any Nickel-Iron alloy. Mesh: 1-250mesh Thickness: 0.05mm and above.

Invar 36 wire mesh/screen:Alloy 36 wire mesh-nickel iron alloy wire mesh:has thermal expansion of one tenth that of carbon steel up to 400ºF(204ºC).

Alloy 42 wire mesh is alloy with high magnetic permeability; low expansion till 300°Cand it matches the expansion of soft glass .Mesh: 0.05-250mesh

Alloy 48 wire mesh/screen has expansion that matches soda-lead and soda-lime glass. Used as leads for electronic applications.Mesh: 0.5-250mesh.

NiFe 60/40 wire is high nickel based welding wire for joining and rebuilding cast iron. Wire Diameter: 0.05mm-10mm. Has excellent weld ability.

Invar 36-Alloy 36: possessing a rate of thermal expansion approximately one-tenth that of carbon steel at temperatures up to 400ºF Diameter:0.05-10mm

Nichrome 70/30 Wire Mesh is used as conveyor belt or carriers in Industrial furnaces (up to 1230°C) with alternating oxidizing/reducing atmosphere.

Nichrome 60/15 wire mesh/screen: Used as carrier belt or conveyor in high temperature. heating devices operating up to 1000 ℃(1850F).

Nichrome 37/18 wire has excellent resistance to high temperature oxidation, corrosion and good wear resistance. Wire diameter:0.05mm to 10.0 mm

NiFe 60/40 wire mesh/screen is high nickel based welding wire for joining and rebuilding cast iron. Mesh: 0.5-250 mesh/Inch. Thickness: Min0.05mm

Nichrome 20/25 wire mesh/screen is used in numerous domestic appliances and industrial resistors.Good resistance to oxidation at high temperatures.

Nickel Chromium Mesh/Screen: Ni80Cr20:Good anti-corrosion, resisting to oxidation at high temperatures. High melting point of about 1400 °C (2552 °F)

Expanded Nickel Mesh/Screen is widely used in battery and chemical industries.Purity over 99.5%,Thickness:0.1mm~8.0mm. Has excellent heat resistance.

Nickel 233 mesh/screen is a commercially pure wrought nickel alloy combining good corrosion resistance with high electrical & thermal conductivities

Nickel 220 mesh/screen is similar to Nickel 205 mesh except with a chemical composition controlled for application as cathodes in electronic tubes.

Nickel iron Nilo 42 wire is nickel-iron controlled expansion alloys with high magnetic permeability; Has low expansion till 300°C.Wire Dia. 0.05mm-10.

N-155 alloy wire: High temperature properties which are inherent&do not depend upon age hardening. Recommended for high stresses.Good oxidation resist

Hastelloy C aolly contains Cr, Mo and other elements. It has the ability to resistant oxidation and corrosion and its melting point is 1325-1370 ℃

Hastelloy B aolly contains Cr, Mo and other elements. It has the ability to resistant oxidation and corrosion .Its melting point is 1330-1380℃ .

Hastelloy X alloy wire contains Cr, Mo and other elements. It has the ability to resistant oxidation and corrosion . Its melting point is 2300-2470 ℃