control valve

Material Input Pressure:<10Kg
Material Inlet Outlet Size:1/8'' t(f)
Operating Cycle:<600/min

Flow Adjustment:Unavailable
Operating Air Source:0.4-0.7Mpa
Min.Shot Volume:0.01ml
Operation Viscositi:1-1.000.000cps

Type of Operation:A
Flow Adjustment:Available
Operating Air Source:0.4-0.7Mpa
Min.Shot Volume:0.01ml
Operation Viscositi:1-1.000.000cps

We supply different types ofhydraulic valves like Pressure Control Series, Flow Control Series, Electro-Hydraulic Control Series, Directional Valves,

Air-Liquid Tubeless Snap-in Valves For Tractors & Graders
TR618R Snap-in Valves replaces rigid air-liquid Valves TR618A.
European number is 35GSW15.

Min. Order:500 pcs;Packing:carton box;Transportation:by sea or air;PaymentType:T/T,L/C;Trademark:sorl;PatentRight:TS16949;ExpRegion:all over the worl

Body Material:Sus 304 Stainless Steel
Material Input Pressure:<10Kg
Material Inlet Outlet Size:1/8'' t(f)

S series directional solenoid/air 5/2 way valves from 1/4" to 3/8" with both flying leads type and DIN type connector.

Operating Air Source:0.4-0.7Mpa
Overall Dimensions(mm):Round ￠25 Long 150
Weight:165 g

Type of Operation:A
Flow Adjustment:Available
Operating Air Source:0.4-0.7Mpa

ESP series valves are newly designed bye E.MC pneumatics & hydraulics for one year, but immediately get very good feedback from the market.

UD Series: Direct acting, Working medium: air, water, oil, gas. Normal Close style.
UDH: high pressure series.

China Kaiyuan Pneumatic Engineering Co.,Ltd. is domestic automatic components and parts manufacturers of industry with trade leading position to incre

DMA90D-4WT
90° Slight Adjustable Flame, Single Head Safety Brass Valve
Thickness about 40cm、
small-turning switch
Fit for thin typ

09 Series Solenoid Valve?
??09 Series Solenoid Valve is two-position & two-port guiding solenoid valve in Hailong basic type from Germany. It

Hand-draw Valve, Turn Valve and Foot Valve Hand-draw Valve, Turn Valve and Foot Valve are change valves controlled by hand or turning handle or pushi

CY High Pressure Change Valve ?
This series high-pressure two-position & three-port change valve adopts stop type structure, with the cha

Pressure control valves Finotek manufacturered as per different function of valves

description:
1. set temperature range: 6 centigrade, 12 centigrade, 16 centigrade, 20 centigrade, 24 centigrade, 28 centigrade
2. set tempe

LJ600 control valve is multifunctional control with modulating thermostat.

HLM6305
AIR VENT VALVE

pneumatic shut-off valve with soft seal structure, design work and repair seal seal small operating torque, sealing pressure than moderate,

pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures.

2-way 2-position series threaded cartridge valve
Fluid Temp:-20~70
Minimum Working Voltage (V):90%Normal pressure

pilot operated reducing valve
1.model: 03 06
2.working pressure(Mpa):5 10 20 31.5
3.Max.Flow:03(150L/min)06(300L/min)

It is particularly applicable to the engineering pipeline for gas separation by pressure swing adsorption such as hydrogen, carbon dioxide, oxygen.

welcome to order

Body material: carbon steel
Ball material: SS304
Stem material: SS301
Ball seals: PTFE+20%C
Spring washer: 60Si2MnA...

Modular restrictive check valve
model: 02 03
maximum pressure(Mpa) 31.5

1. Meter-in or meter out throttling adjustment control
2. With two throttle check valves
3. ISO, NFPA, ANSI Sandwich plate mounting