construction pu foam

Can cut the large foam into the same length, pieces and slices.

The machine can be used for continuous producing Flexible Polyurethane Foam(maxfoam). It can be realized numerical control during the whole production

1. It can be automatic cutting the foam into difference sizes.
2. It can be realized numerical control with accurate.

1. The control becomes simple and intuitive,
2. The operation becomes humane convenient.
3. Can cutting more precise graph.

SL-CC-2Z use of vibration to be cut with a blade , knife-belt can rotate at any angle , you can replace the roll-cut, flat cut , vertical cutter etc.

1. Air permeability, and comfortable.
2. The hardness and softness is controllable.
3. The production process is full automatic.

SL-HC is mostly used for shearing sponge block. Can hold up and down, sending cutter and platform back and forth. The speed is 12m/min (can be adjust)

SL-HC is mostly used for shearing sponge block. Can hold up and down, sending cutter and platform back and forth. The speed is 12m/min (can be adjust)

1. Easy operation.
2. High efficiency.
3. Can take infinitude of minimum cutting circle.

The new developed automatic rebonding machine, with a steam, which can produce foam 5 times as fast as form one. Stirring cubage is 10 m3.

1. High automatic standard.
2. Simple operation.
3. Can make 20m high quality and flat top foam per time.

1. High automatic standard.
2. Simple operation.
3. Can make 20m high quality and flat top foam per time.

CNC Foam Contour Cutting Machine use the vibrative blade for cutting any angle. With pressing rollers device.

The new developed product, with a steam, which can produce foam 5 times as fast as form one.

SL-VC is mainly used to cut the large foam into the same length, pieces and slices. The cutting thickness is ≥ 3mm.

This machine is mainly used to cut the large foam into the same length, pieces and slices.

Foam Peeling Machine (SL-PC) is mainly applies to continually cut columned foam to certain thick piece, automatically roll it.

SL-KC-22 is used for chipping edge & corner foam blocks and also reclaiming is utilized. Breaking particulate is 3mm to 20mm.

SL-VC/2 is mainly used to cut the large foam into the same length, pieces and slices. The cutting height is 1200mm.

SL-KC-11 is mainly used for chipping edge & corner foam blocks and also reclaiming is utilized. The breaking speed is 80-100kg/h.

1. Can counting its length.
2. Auto-winding it into reel.
3. Can continually cut.

SL-CC-2Z use of vibration to be cut with a blade , knife-belt can rotate at any angle , you can replace the roll-cut, flat cut , vertical cutter etc.

1. All the chemicals will be filled by digital .
2. All the producing process are automatic.
3. Easy to make the foam.

SL-RF is used for foam blocks that come from foam crusher blown into mixing drum of foam Re-bonding machine. Total power is 13KW.

Can cut the large foam into the same length, pieces and slices.

1. It can be automatic cutting the foam into difference sizes.
2. It can be realized numerical control with accurate.

1. Use the vibrative blade can cutting any angle.
2. High efficiency and easy operation.
3. With 360 degree turning table.

SL-RC is mainly used for multi foam block's horizontal cutting. Its continues cutting without move back. The speed is 5 circles/min.

SL-RC is mainly used for multi foam block's horizontal cutting. Its continues cutting without move back. The speed is 5 circles/min.

CNC Foam Contour Cutting Machine use the vibrative blade for cutting any angle. With pressing rollers device.