cold rolled steel pipe

1) Thickness : 2.5-30mm
2) OD : 32-630mm
3) Technique : Hot rolled
4) Special pipe : API pipe
5) Certifiacation : ISO9001:2008

Single phase of cold deformation of austenitic stainless steel with good performance, can be drawn into very thin wire, cold - rolled into very thin

1.Material:10#/20#,GB3087/GB5310,A106B.A53B,
2.OD:1/4"-14"
3.WT:SCH40-SCH160
4.API5L,API5CT

1) Thinckness : 2.5-50mm
2) OD : 101.6-609.6mm
3) Tecehnique : Cold drawn
4) Special pipe : API pipe
5) Certification : ISO9001:2008

Maraging stainless steel is after solution treatment, always cool to room temperature to martensite organizations, conducted by the solid solution St

1.O.D:114MM-610MM
2.W.T:4MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

1) Thickness : 3.3-38mm
2) OD : 33.4-245mm
3) Technique : Hot rolled
4) Special pipe : API pipe
5) Certification : ISO9001:2008

Precipitates as the primary ferrite AISI 316l, adding only a slight increase in copper the critical solidification temperature range (about lOK), whi

1.Material:10#/20#,GB3087/GB5310,A106B.A53B,
2.OD:1/4"-14"
3.WT:SCH40-SCH160
4.API5L,API5CT

Theoretical weight of stainless steel pipe : W= - wall x wall thickness of outer diameter x0.02491x length

1.O.D:114MM-610MM
2.W.T:4MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

This type of steel can be divided into stainless steel seamless pipe and welded stainless steel ( welded tubes ) two categories,

1.O.D:114MM-610MM
2.W.T:4MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

Classified according to the profile and special pipe in pipe, widely are round steel pipe, but there are also some square, rectangle, semi-circular,

1.Size:O.D.: 1/4"~14"(13.7-355mm)
2.Thickness: SCH10S~SCH.XXS (1.24MM~35MM)
3.Material:10#/20#/API5L/A106B/A53B
4.FOB Price:700-1000USD

Hot rolled sheet volume class : according to our statistics, as of the end of 2004 National hot rolling mill capacity to 47.5 million tonnes.

1.O.D:13.7MM-610MM
2.W.T:2MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

Nominal diameter of hot - rolled stainless steel pipe in 100mm-900mm is mainly used in chemical fluids, materials 201 202 304

1.O.D:114MM-610MM
2.W.T:4MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

Same bending, torsional strength, lighter weight, it is also widely used in the manufacture of mechanical parts and engineering structures. Also used

1.Size:O.D.: 1/8"~24"(10.3MM~610MM)
2.Thickness: SCH10S~SCH.XXS (1.24MM~35MM)
3.Material:10#/20#/API5L/A106B/A53B
4.FOB Price:756-800USD

1.Material:10#/20#,GB3087/GB5310,A106B.A53B,
2.OD:1/4"-14"
3.WT:SCH40-SCH160
4.API5L,API5CT

1.Material:10#/20#,GB3087/GB5310,A106B.A53B,
2.OD:1/4"-14"
3.WT:SCH40-SCH160
4.API5L,API5CT

1.Material:10#/20#,GB3087/GB5310,A106B.A53B,
2.OD:1/4"-14"
3.WT:SCH40-SCH160
4.API5L,API5CT

1.Material:10#/20#,GB3087/GB5310,A106B.A53B,
2.OD:1/4"-14"
3.WT:SCH40-SCH160
4.API5L,API5CT

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

1.Material:10#/20#,GB3087/GB5310,A106B.A53B,
2.OD:1/4"-14"
3.WT:SCH40-SCH160
4.API5L,API5CT

1.Material:10#/20#,GB3087/GB5310,A106B.A53B,
2.OD:1/4"-14"
3.WT:SCH40-SCH160
4.API5L,API5CT

1.O.D:13.7MM-101.6MM
2.W.T:2MM-11MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

1.O.D:13.7MM-914MM
2.W.T:2MM-60MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L