coil winding

The automatic ceiling fan winding machine is used for household ceiling fans, commercial ceiling fans and industrial ceiling fan.
Adopts 2 stations

The automatic motor stator winding machine is suitable for AC motor , induction motor , DC motor , small electric motor , synchronous motor , etc

The stator coil winding machine has Three winding stations,Automatic feed, press stator tight, assemble fixture, wind, clamp and cut wire.

1.Used for big brushless motor stator needle coil winding
2.Suitable for water pump motor coil winding
3.High efficiency
4.High safety
5.Full auto

The BLDC rotor winding machine is used for air heaters motor, heat pumps motor, condensers motor, cooling units motor, evaporators motor, etc

This brushless motor needle winding machine is designed for brushless outer rotor winding. The armature coil winder adopts double-position needle wind

1.The automatic coil winding machine adopt two stations structure,
2.Suitable for electric motor stator coil making.
3.Has no distinct noise.

This motor stator coil winding machine is suitable for compressor motor ,generator stator and other electric motor with high filling slot stator.

1.Designed for electric motor stator coil winding and insertion
2.Has one automatic motor coil winding stations and one stator coil inserting station

For this winding inserting machine, the wedge feeding is to be done by stepping motor, while coil and wedge inserting is done by servo system.

1.Suitable for winding ceiling fan stator, external armature such as frequency conversion alternator, generator armature.
2.Two working stations.

Suitable for BLDC motor stator winding, such as stepping motor, brushless motor, fan motor, bladeless fan motor, servo motor, etc

This lacing machine can do slot by slot lacing, interval lacing, and fancy lacing. All could be achieved by setting in human-machine interface lacing.

1.Designed for three phase motors
2.Support Ipad operaion.
3.With 3 winding working stations and 1coil inserting working station

1.Mature and advanced technology,reliable quality,easy operation and maintenece.
2.Hight efficiency
3.can meet the 2poles,4poles,6poles coil.

This is semi-auto type armature winding machine, wire diameter within 0.08-1.08mm. The loading, unloading, hooking process should be done by manual.

1.With servo driven system,
2.Used for inserting coil and wedge into the stator slot simultaneously.
3.Can change speed and feeding mode.

This coil machine is suitable for three phase motor, fan motor and other motor, with a variety model number but low output. It is of high automation.

1.The stator needle winding machine is suitable for multi-pole stator stepping motor and Brushless direct current motor.
2.It is very easy to operate

The Universal motor stator coil winding machine is used for power drills, wash machines, blowers and kitchen appliances , blenders, vacuum cleaners .

1.Driven by hydraulic system
2.PLC programming
3.Working before winding lacing
4.Design of inner expansion
5.The stator O.D. maximum is 160mm.

1.The needle winding machine will auto do winding and wire will auto go through.
2.And just Loading, unloading, clamping should be done manually.

1.Adopt three needles winding
2.winding speed:50-800rpm
3.Stator OD:30-80mm
4.stator stack length:5-60mm

1.Sutiable for bldc armture coil winding
2.Double two working stations
3.Parameter can be set on the HMI.
4.Has self-diagnose function.

This motor rotor winding machine is designed for the Blower motor BLDC armature rotor coil winding. The automatic rotor winder adopts needle winding.

This motor stator automatic needle winding machine is suitable for household appliances such as washing machines, fan motors, ceiling fan motor .

1.Apply to all kinds of micro motors.
2.Winding 1-8 coils at a time.
3.Wire diameter:0.08~1.0mm; Rotation speed:3200R.P.M

1.Fast speed,low noise,simple operation
2.Equipps with pressing, automatic feeding,automatic cutting device
3.Lacing up and down sids Simultaneously

1.Suitable for two poles stator coil winding,such as universal motor,series motor
2.Has two coil winding working stations
3.max winding speed 450rpm

1. Designed for the electric bike motor stator .
2. Equipped with the servo control system.
3. Able to diagnose the fault,count the output ect.