ceramic mechanical seals

Seal face: Carbon graphite, FDA conform
Seat: Silicon carbide
Secondary seals and metal parts according to application and customer's specifications

1. Stationary Ring:ceramic/SIC/TC
2. Rotary Ring:carbon/SIC/TC
3. Secondary Seal:NBR/EPDM/VITON
4. Spring&Metal Parts:SUS304/SUS316

Description
Elastomer Bellow Shaft Seals(TSC1):
Mediums: Water, oil, and weakly-corrosive mediums

SUPPLY FRISTAM PUMP MECHANICAL SEALS. We design and manufacture mechanical seals for the Food, Dairy, and Pharmaceutical Industries.

Operating limits
Specification: 18~80mm
Pressure: ≤1.0Mpa
Temperature:- -20~180℃
Linear speed:≤15m/s...

Features
Stationary springs
Balanced
Independent of direction of rotation
Independent of pressure direction

industrial mechanical pump seals
Secondary Seal(VITON/PTFE+VITON)
Spring & Other Parts(SUS304/SUS316)

CRN PUMP seal, CR SERIES SEAL. MECHANICAL SEALS FOR centrifugal submersible sewage pumps.Replacement For Grunfos 96525490 For CRN 32/45/64/90

. Equivalent to type 1609BS. JOHN CRANE 8B1 SEALS. Our mechanical seal model 8B1 can Replace AESSEAL M02S and JOHN CRAN 8B1 SEALS.

CRN PUMP seal, CR SERIES SEAL. single spring o-ring mounted semi-catridge seals with push-fit head,suit for CENTRIFUGAL pumps repair. CRN32 pump seal

Features
For unstepped shafts
Single seal
Balanced
Independent of direction of rotation...

1.Single Acting
2.Independent Direction Of Rotation

.Low thermal expansion
.OEM service is available

Stationary seat and/or seal face replaceable
Can be adopted under positive pressure or under back pressure
Operation in vacuum without additional se

Single seal for Waukesha Universal I series.Waukesha Pump Seal with Features of Water Oil Resistant.Waukesha Cherry-Burrel® U1 Sanitary pump seals

Single-Spring Mechanical Seal type VULCAN97
temperature:-50℃to +200℃
Pressure:<<1 Mpa
Speed:<20m/s
media:clean water, sewage water,Oil

Pressure: p = 12 bar (174 PSI)
Temperature:
t = -20 °C ... 160 °C (-4 °F ^ +320 °F)
Sliding velocity: ... 20 m/s (66 ft/s)
Viscosity: ... 300 Pa

Introduction:Operating limits
Pressure:≤1.2MPa
Temperature:-60℃~180℃
-20℃~230℃
Linear speed:≤25m/s

Plug-In Seal, 35mm, for pump code 2670,3153,5100.Flygt Plug-in Seals feature two independent mechanical seals mounted in a single,ready-to-install.

Hangzhou Sealcon Fluid Machinery CO.,Ltd was established in 2011,with Sealcon trademark we specialized in mechanical seal design.

Rotary Ring: Carbon/SiC/TC
Stationary Ring: Ceramic/SiC/TC
Secondary Seals: NBR/FPM/EPDM; PTFE
Spring & Other Parts: SS304/SS316/SS316Ti

type 1B mechanical seal, for blower pump, diving pump, circulating pump, replace the mechanical seal of John Crane 1B. Single seals.

1.Complied with ISO9001:2008
2.Pull tight lock mechanism
Rotary Ring:Carbon/SIC/TC/SUS
Stationary Ring:Carbon/SIC/TC
Secondary Seals:NBR/EPDM/VIT

Hangzhou Sealcon Fluid Machinery CO.,Ltd was established in 2011,with Sealcon trademark we specialized in mechanical seal design.

CRN PUMP seal, CR SERIES SEAL. single spring o-ring mounted semi-catridge seals with push-fit head,suit for CENTRIFUGAL pumps repair. CRN32 pump seal

we can make mechanical seal equal to Burgmann MG1
material is choice.

Specifications
1.ISO9001:2008,
2.High quality & precision products,
3.high quality fuel slurry pump seal

Replacement AES P02/P02T/ Vulcan 20/ Burgmann MG920/D1-G50/ John Crane 2(N SEAT Roten 21. Sterling 212/ Flowserve 200. Single spring mechanical seal

Unbalanced mutiple spring seal with utilizing a simple rugger open rotary unit. FLOWSREVE RO SEALS

Single face, unbalanced, 360º rotary.
Bellows is out of torsional stress, good design.
Sealing ring is driven by springs and L-ring.
No connectors