casting iron check valve

Pneumatic Cast Iron Dual Plate Check Valves Double Door , DN50 - DN900
 
 
 
 

Check valves are opening and closing a borrow medium force automatically block medium of the valve upstream. Installed to prevent reverse flow in pipe

1.Prompt reply
2.Bulk quantity
3.Manufacturer
4.ISO9001:2000
5.OEM Service

Check valve
1.the products design conform JIS BS ANSI DIN
2.applicable medium:W.O.G
3.applicable temp:200 degrees below

Check valves are opening and closing a borrow medium force automatically block medium of the valve upstream. Installed to prevent reverse flow in pipe

503-F cast iron swing check valve flanged ends
conform to MSS SP-71
Flanged drilled to ANSI B16.10 (125lb)
body: cast iron

Check Valve: Flange End Check Valve, wafter type dual plate check valve, Swing check valve, cast iron check valve

China investment casting check valve manufacturer, investment casting check valve supplier, investment casting check valve factory, investment casting

Features:
-Leakage-free closure in one direction
-5 cracking pressures
-For threaded connection(screw-in connection)
-Cartridge connection

1.Prompt reply
2.Bulk quantity
3.Manufacturer
4.ISO9001:2000
5.OEM Service

Check valves are opening and closing a borrow medium force automatically block medium of the valve upstream. Installed to prevent reverse flow in pipe

1.Name:cast iron check valve
2.Material:cast iron
3.Thread:1"*33,1"*30,1"*27
4.Used in air compressor
5.Different size are available

Application
Design According to MSS SP-71
Pressure/Temperature Rating: ANSI B 16.1
Face to Face Dimensions: ANSI B 16.10

Min. Order:1 PC;Packing:PLYWOOD CASE;Transportation:by air,by vessel;PaymentType:T/T, L/C;Trademark:JD & JDBV & OEM;Certificate:ISO9001,ISO2000,CE

Cast iron swing check valve, bronze trim, flange end
1. Conforms to mss sp-71
2. Flanges drilled to ANSI b16.1(125 lb)
3. Face to face dimension

CAST IRON SWING CHECK VALVE
BODY: CAST IRON, STEM: a105/cast iron +2Cr13. seat : Stainless steel
Surface: anti-rusting oil. painting

 
 
Flanged Type Water Fountain Equipment Cast Iron Check Valve IP68 Silent Type</p

Features:
-Leakage-free closure in one direction
-5 cracking pressures
-For threaded connection
-Cartridge connection...

China cast iron check valve manufacturer, cast iron check valve supplier, cast iron check valve factory, cast iron check valve company, cast iron chec

Cast iron/ductile iron check valve, flange end, lift type, metal seated
Available standards: ANSI class 125/150, DIN 3202-F1

China cast iron flange check valve manufacturers, cast iron flange check valve factory, wholesale cast iron flange check valve, cheap cast iron flange

Standard:API600,AP16D,BS1868,BSEN13709,ASIB16.34
Materail: WCB,Stainless steel ect
Pressure: class150-class 2500
Size:2 "-48"

Normal Pressure: PN10, PN16
Swing type and Lift type
Suitable Medium: Water, Sewage, Air, Oil, Salts, etc.
Temperature: Low than 120 degree cent

Check valves are opening and closing a borrow medium force automatically block medium of the valve upstream. Installed to prevent reverse flow in pipe

Application
1 Face to face is according to DIN3202-F1
2 Flange drilled is according to DIN2532/2533

Marine JIS Marine Valve Casting Iron / Screw Down Check Valve DN50 ~ DN500
 
<

Check valves serve to prevent the backflow of medium flow in the piping system, widely applied in the field of potable water

Cast Iron Body
Bronze Trim
DN50-DN250

JIS marine cast iron globe valve/SDNR valve/gate valve/swing check valve/hose valve

1.Prompt reply
2.Bulk quantity
3.Manufacturer
4.ISO9001:2000
5.OEM Service