cast steel valve

Type: Gate, Globe, Check
Size: 1/2£¢~12£¢
Rating : ANSI 150lb, 300lb
Body Materi

1-PC Stainless Steel Ball Valve,Reduce Port,1000WOG,PN63,CF8M/CF8,SS316/SS304,1.4408/1.4301

China stainless steel cryogenic ball valve manufacturers, stainless steel cryogenic ball valve factory, wholesale stainless steel cryogenic ball valve

Construction is as follows:
1.Full port or conventional port
2.Outside screw and yoke(OS&Y)
3.Extended Bonnet
4.Self-centering gland and flange...

Description:
Size: 1/2" ~ 2"
Pressure: ANSI CLASS 150~1500
Bonnet Design: Bolted Bonnet, Welded Bonnet.
Material conform to ANSI/ASTM...

Our ball valve is produced after absorbing the advanced technology abroad, thus of superb quality. It can meet all customer need

Brass Stop Valve with Decorate Plated.
Size:1/2" 3/4"

Technical support:
Size: DN10 ~ (BSP, NPT thread
The valve body material: CF8M (AISI 316) or CF8 (AISI 304).
Seal valve core: PTFE teflon
Applicab

Size:1/2"-48" or DN15-DN1200
Pressure:150LB-2500LB or PN16-PN250 or 10K-40K
Material:WCB,WCC,LCB,LCC,WC6,WC9,C5,C12,CF8,CF8M,CF3,CF3M,CF8C,CN7M,etc

valvehome.com
Min. Order:1 Piece/Pieces
Payment Type:T/T,L/C
Transportation:Ocean,Land,Air
Productivity:8000pc/Year

MAIN FEATURES:
Principle of the forged steel floating ball valve: This kind of ball valve has a floating ball supported by two valve seats. Under the

Please see the picture.
For more information,please contact us.Thanks.

FREE-VALVE's flange foot valve is a kind of energy saving valve, usually installed at the bottom of the suction pipe of pump. The functions of foot v

With professional and productive factory, Wenzhou Redstar Valve Co.,Ltd is one of the top level China forged steel flanged
ends gate valve manufac

With professional and productive factory, Wenzhou Redstar Valve Co.,Ltd is one of the top level China nickel aluminum bronze
2pc floating ball val

Standards:
1) Design: BS5352
2) Face to face: ASME B16.10
3) SW: ASME B16.11 and NPT to ASME B1.20.1
4) Inspection and test: API598...

magnetic valve normally open close brass stainless steel solenoid valve
2.5-50mm orifice;
2 way;
NBR ,VITON

China stain steel flange ball valve manufacturers, stain steel flange ball valve factory, wholesale stain steel flange ball valve, cheap stain steel f

China stain steel flange globe valve manufacturers, stain steel flange globe valve factory, wholesale stain steel flange globe valve, cheap stain stee

Main features: small volume, large flow, good sealing performance, resistant to 740 MMHG (relative), any installation position

Main features: small volume, large flow, good sealing performance, resistant to 740 MMHG (relative), any installation position

Model No.: XQA-Z-25J
Working Pressure:0.3-0.8MPA
Ambient Temperature:-25-60℃

Our products are manufactured in compliance with GB, JB, , API, JIS, ANSI, NF, BS, DIN, etc

Our products are manufactured in compliance with GB, JB, , API, JIS, ANSI, NF, BS, DIN, etc

Our products are manufactured in compliance with GB, JB, , API, JIS, ANSI, NF, BS, DIN, etc

Our products are manufactured in compliance with GB, JB, , API, JIS, ANSI, NF, BS, DIN, etc

Our products are manufactured in compliance with GB, JB, , API, JIS, ANSI, NF, BS, DIN, etc

Our products are manufactured in compliance with GB, JB, , API, JIS, ANSI, NF, BS, DIN, etc

Our products are manufactured in compliance with GB, JB, , API, JIS, ANSI, NF, BS, DIN, etc

Our products are manufactured in compliance with GB, JB, , API, JIS, ANSI, NF, BS, DIN, etc