cast check valves

INDUSTRIAL VALVES TYPES:
Gate Valve, Globe Valve, Check Valve, Ball Valve and Butterfly Valve.
Forged and Cast Steel Vales from 1/4" to 24"

1. One closure in one direction,100% tested of no oil leakage
2. Threads connections of BSP and Metric option
3. Precise cracking pressures

light,easy to operate.High efficiency,high quality valve

strong wear resistant
good tightness
incorruptible

1. One leak free closure in one direction
2. For threads connection
3. Four cracking pressures available

Brass Spring Check Valve
Material: Brass
Suitable for water
Specifications: 1/2" ~ 2"

JIS-marine- bronze swing check valve
F7371 5k25-40

Type : Screw-Down Check Globe Valve
Material : Bronze
Media : Sea Water
Size : DN15 - DN65
Nominal Pressure : 5Kg / cm2

Stainless Steel Y Type Check Valve
Design Standard: ANSI B 16.34
Testing Standard: API598
For general chemical and industrial service

Size: 2" ~ 24" (DN50 ~ DN600)
Rating: ANSI 150lb-1500lb
Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel
Trim: API600

1/2" ~ 2" Brass Spring Check Valve(ZH1730)
1) Size: 1/2" ~ 2"
2) Environment Temperature: -20~ +120℃
5) Guarantee: 10 years

Stainless Steel Check Valve
Casting or Forging
Stainless Steel Check Valve
Casting or Forging

we specially invest and put more effort to develop air solenoid valve products and equipments to meet quality of ISO9001 procedures to meet

Features:
-Sandwich plate valve
-For use in vertical stacking assemblies

1. Slow closing time: less than 60 seconds, adjustable according to the need.
2. Strength test: 1.5 times nominal pressure.

Hydraulic, pneumatic Angle type fast sacking of mud valve, it is a kind of by the hydraulic source or pneumatic source actuator Angle type cut-off typ

DC-C1113 Brass swing check valve
Size:1/2"to 2"

1. Meter-in or meter out control as indicated
2. Control speed of the actuator in one or both directions
3. Handwheel adjustment with locknut

-With or without leakage port
-With or without pre-opening
-Type with pre-opening, dampened decompression
-3 opening pressures

Brass flange check valve

Brass check valve
(C×C) 1/2"-2"

Check Valve

Dual-plate wafer check valve
Fit: PN10,PN16 flanges
DN40~DN1200
Optional Materials:
Body: Cast Iron GG25, Ductile Iron GGG40, GGG50...

Design:
Built in Double-disc wafer swing check valve
Retainerless
Metal seal or rubber seal.
DN15-DN1200, class150-2500

horizontal type brass tilting disc check valve /This valve is ideal for hydro, heating and pneumatic plants.Seals in Metal
.Screw in Brass

Feature:
-Suitable for direct in-line mounting
-Pressure and viscosity dependent

Restrictive check valve for flow control
model: 10 12 16 20
maximum pressure(Mpa) 31.5

• Meet MSS-SP-80 Standards
• Max. Pressure: 125PSI Steam; 200PSI CWP
• Cracking Pressure .75 To 1PSI
• Temp. Range: -20 To 406 º F

1. Reduce hydraulic shock in the main system
2. Subplate connections, ISO standard
3. Two different cracking pressures

check valve , valves , Swing Check Valve