case and power supply

Single output:60W
Input voltage range: AC88 ~264V 124-370VDC
78x93x56mm.

Single output: 75W
Input voltage range: AC85~264V ; 120-370VDC
55.5x125.2x100mm.

mtbf:408.3k hrs min. mil-hdbk-217f (25ºc)
dimension: 159*97*38mm (l*w*h)
shell material:aluminum & iron
input frequency:50 / 60hz

Single output: 150W Single output LED powers
Input voltage: AC220V20%
IP67
235x130x65mm.

Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

Single output:25W
Input voltage range: AC85~264V 120-370VDC
107x61x28mm.

The power supply is considered a component which will be installed into final equipment.
Protections: Short circuit / Overload / Over voltage

setup, rise, hold time: 200ms, 50ms, 20ms at full load
input voltage range: 90 ~ 132vac / 180 ~ 264vac by switch 254 ~ 370vdc

frequency range: 47 ~ 63hz
efficiency (typ.): 83%
ac current: 6a/115vac 3.5a/230vac
inrush current (max.): 18a/115vac 36a/230vac

1.Output 12.5A & 12V & 150W
2.Protections: over load, over voltage, over temp.
3.Pass CE &ROHS
4.Cooling by free air convection

Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.

All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.

current range:0 ~ 8a
rated power:40w
ripple & noise (max.) note.2:75mvp-p
voltage adj. range:4.75 ~ 5.5v

mtbf: 316.2k hrs min. mil-hdbk-217f (25ºc)
dimension: 159*97*38mm (l*w*h)
packing: 0.47kg; 30pcs/15.56kg/0.0250cmb

All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.

Output Power: 250W
Brand Name: INTMW
Output Voltage: 27V
Output Frequency: N/A
Output Current: 9A

line regulation: ±0.5%
load regulation: ±1.0%
withstand voltage: i/p-o/p: 3kvac i/p-fg: 1.5kvac o/p-fg: 0.5kvac

dc voltage: 12v
rated current: 4.2a
current range: 0 ~ 4.2a
rated power: 50.4w
voltage adj. range: 10.8 ~ 13.2v

The power supply is considered acomponent which will be installed into final equipment.
Universal AC input/Full range

Certificate: CE, RoHS
Color: Silver
Shell Material: Aluminum & Iron
Safety Compliance: EMC & LVD
Weight: 0.58Kg

dc voltage:7.5v
rated current:26.5a
current range:0 ~ 26.5a
rated power:198.75w

High operating temperature up to 70℃
Withstand 5G vibration test
High efficiency, long life and high reliability

100W Switching Power Supply RS-100
1) INPUT: 110 ~ 230VAC 2) CE RoHS Approved
3) DIMENSION: 247*127*63.5mm (L*W*H) 4) 1 Year Warranty

working humidity:20 ~ 90% rh non-condensing
Protection type: Hiccup mode, recovers automatically after fault condition is removed.

60W Power Supply 5V S-60-5
1) INPUT: 110 ~ 230VAC 2) CE RoHS Approved
3) DIMENSION: 159*97*38mm (L*W*H) 4) 1 Year Warranty

100W 3V Power Supply S-100-3
1) INPUT: 110 ~ 230VAC 2) CE RoHS Approved
3) DIMENSION: 199*98*38mm (L*W*H) 4) 1 Year Warranty

100W 9V Power Supply S-100-9
1) INPUT: 110 ~ 230VAC 2) CE RoHS Approved
3) DIMENSION: 199*98*38mm (L*W*H) 4) 1 Year Warranty

100W 10V Power Supply S-100-10
1) INPUT: 110 ~ 230VAC 2) CE RoHS Approved
3) DIMENSION: 199*98*38mm (L*W*H) 4) 1 Year Warranty

100W 28V Power Supply S-100-28
1) INPUT: 110 ~ 230VAC 2) CE RoHS Approved
3) DIMENSION: 199*98*38mm (L*W*H) 4) 1 Year Warranty

100W 30V Power Supply S-100-30
1) INPUT: 110 ~ 230VAC 2) CE RoHS Approved
3) DIMENSION: 199*98*38mm (L*W*H) 4) 1 Year Warranty