cartridge mechanical seal

TBMTN mechanical seal
For industrial pumps
Replacing the mechanical seal of Burgmann M7N
Pressure: ≤1.2MPa
Speed: ≤15m/s

Single Spring Mechanical Seals
Replace of burgmann type BT-RN
Temperature:-40℃to +200℃
Pressure:<1.0mpa
Speed:<15m/s

Operational Conditions:
Temperature: -20℃ to +180℃
Pressure: ≤1.2MPa
Speed: ≤15m/s

pressure: within 0.5Mpa
speed: within 12m/s
Temperature: -20 to 200 degree celsius
medium: water, oil and another weakly-corrosive mediums, etc

Replace SEALOL Type 1527 Seal. a typical large-spring mechanical seal with internal single-end single-spring non-equilibrium drive.

instead of original Flygt seal
Monolithic stationary faces
Supplied with removable setting clip

Single Spring Mechanical Seals CR1527
temperature:-20℃ to +180℃
Pressure:<<1 Mpa
Speed:<<15m/s
for use in oil or chemical flow pumps,vessel pump

Technic parameter
work heat:0 -- 2.0MPa (monolayer piece);0 -- 3.5MPa (double-deck piece)
work temperature:-75℃ -- 260℃

Operational Conditions:
Temperature: -20℃ to +180℃
Pressure: ≤2.5MPa
Speed: ≤15m/s

Applied for clean pumps, water pumps and submersible pumps, etc.
Pressure: within 0.5Mpa
Speed: within 10m/s
Temperature: -20℃~100℃

Applications:Oil, light hydrocarbon, aromatic Hydrocarbon, organic solvents,week acids, ammonia etc.

An economically priced seal with conical spring for a wide range of applications.Recommended for tandem pumps,clean water pumps and pumps for home.

Single -Spring Seal CR1527 Mechanical Seal
temperature:-20℃ to +180℃
Pressure;<<1 Mpa
Speed:<<15m/s

Operational Conditions:
Temperature: -20℃ to +180℃
Pressure: ≤2.5MPa
Speed: ≤15m/s

used in water pumps, diving pumps and household pumps,etc
Pressure: within 1Mpa
Speed: within 15m/s
Temperature: -30~200 degree celsius

Stainless steel metal parts
No plastic parts
Robust & compact rotary design

Single Spring Mechanical Seals CR103
temperature:-40℃to+230℃
Pressure :<1.0MPa
speed:<3000r/min

Flygt and Grindex Pump Seals /Flygt and Grindex Pump Seals 2135/ 2151/2201/3126/45440/4451. 35MM MECHANICAL SEALS FOR GRIPOC PUMPS

1. Stationary ring (carbon/SIC/TC)
2. Rotary ring (ceramic/SIC/TC)
3. Pressure: ≤1Mpa
4. Speed: ≤15m/s

Monolithic stationary faces
Unitised rotary, no loose faces to fall out during installation

AZM74A mechanical seal
For industrial pumps
Replacing the mechanical seal of Burgmann M74-D

Single Spring Mechanical Seals
Size:35-85mm
rotary ring:car/sic/tc
stationary ring:car/sic/tc
secondary seal :nbr/erp/vit...

Replace JOHN CRANE TYPE 8B2 SEAL. This seals work In Mechanical Pump Seal D574518. armstrong pumps mechanical seal.It raplacement flowserve RA seals

1. Stationary Ring:ceramic
2. Rotary Ring:carbon
3. Secondary Seal:NBR
4. Spring&Metal Parts:steel

Used for Flygt pump no:2024/2066/2075/2101/3065/3080/Ready 24
Monolithic stationary faces

Temperature:-20℃ to +180℃
Pressure: ≤1.0MPa
Speed: ≤15m/s

Cauldron-using mechanical seal 204
Pressure:0.1-0.25MPa
Speed: > 5m/s
Temperature: -40 to 200 ℃

Replacement AES T01/ 8 / Burgmann M32 seals. Roten L4B, Sterling SM3. Flowserve 38.This mechanical seal, for industrial pump.

1.Stationary Ring:ceramic/carbon
2.Rotary Ring:carbon/ceramic
3.Secondary Seal:NBR/EPDM/VITON
4.Spring&Metal Parts:SUS304/SUS316

Die casting/Sand Casting/Investment Casting/automobile parts/Machining Parts
Applications:Clean water,sewage water,oil and other moderately corrosi