carbonized fiber packing

1--composed of carbonized fiber
2--braided packing
3--good thermal conductivity

JX306 PTFE FIBER PACKING
　　 PTFE fiber packing is a pure PTFE fiber yarn packing braided into square cross section and impregnated with PTFE disp

info(at)acsealing com Asbestos Fiber Packing? with PTFE is made asbestos yarns impregnated with PTFE, and also has good flexible, resilient,homogeneou

AT503 Made of sintered, highly stretched PTFE multifilament yarns thoroughly impregnated with PTFE. It has good resistance to compression

which is made of PTFE Resin by special processing and by waving into Rectangular cross-section

Kevlar Rope packing is made of Du Pont's aramid yarn impregnated with PTFE dispersion and processed with lubricant. braided into square cross section.

Braided from high-performance KynolTM ( NovilidTM or PhenolicTM) fiber impregnated with PTFE lubricant, good mechanical properties combining softness

Temperature -100-+300
Pressure 35MPa
linear velocity 15m/s
Chemical Resistance PH value 2-12

Double handle control system
Sinmens PLC control system

Kevlar fiber braided packing is made of DuPont's Kevlar yarn impregnated with PTFE dispersion and processed with lubricant, braided into square cross

CARBON FIBER PACKING/Carbonized packing/Pan Fibre packing

Braided from high quality Dupont Aramid/Kevlar fiber with PTFE Impregnation and lubricant additive. Extremely hard wearing.

It is a braided packing made of Aramid fiber. This packig can bear higher-pressure applications than other types of braided packings.

Price:US$10.0;Productivity:120000kg;Min. Order:1 kg;DeliveryDate:20days;Trademark:HuaKai;

Braided by aramid fiber and treated by lubricant and PTFE. It is used in acid, alkali, etc.
Pressure: 3Mpa in centrifugal pumps, 10 Mpa in piston p

Kevlar fiber packing is made of Du Pont's Kevlar yarn impregnated with PTFE dispersion and processed with lubricant.braided into square cross section

Carbon Fiber Packing
The packing is woven of strong carbon fiber after softening treatment and impregnated with the mixture of fine graphite po

1. Packing made of synthetic fiber yarns
2. Packing needs impregnating with block agents, lubricants
3. Economic seal packing choice

Texturized fiberglass braided round packing, diameter: 3mm-50mm, roll length:10m-200m, weight: 25g/m-1950g/m, continuous temperature resistance:550℃

AIFLON 2230 Graphite PTFE packing with aramid corners AIFLON 2232Graphite PTFE & aramid in zebra braided packing
Specification:
Aramid+Fiber

Carbon Packing is made from carbonized fiber yarn treated with graphite particles, and then is braided to form packing.

silica gel packing is made of silica core + glass fiber casing+ silicone coating,

It is made of Dupont's Kevlar yarn impregnated with PTFE emulsion and processed with lubricant. As the strength and module of Kevlar is as high as the

Aramid fiber packing kevlar fiber packing nomex fiber packing are available from China FEITE Sealing Material Co Ltd

WEALSON is manufacturer and exporter of gasket materials,gaskets and gland packing,we can offer products with good quality and low price.

JX305 CARBON FIBER PACKING
The packing is woven of strong carbon fiber after softening treatment impregnation with the mixture of fine graphite

info(at)acsealing com Pure carbon fiber packing is Braided of caebon fiber? impregnated with proprietary lubricants and PTFE,? it has High pressure an

AT511L1 Comparing with the yellow aramid fiber packing, the Nomex Fiber Packing does not require high rigidity of the shafts.

Asbestos PTFE fiber packing
Resistant to alkaline solutions
Density (g/cm3):1.4-1.6

WEALSON Pure Ptfe Fiber Packing is made of pure PTFE yarn, there are no PTFE latex and lubricant.