car kit tool

socket kit

1.Engine Timing Tool Kit for Alfa, Fiat, Lancia.
2.Anodized Colour coded parts for easy identification.
3.Fully comprehensive professional kit.

The included carrying case makes for easy storage and portability
Tested against industry standards for hardness, torque, finish and usability

1.For Vauxhall/Opel 1.9CDTi single cam/8 valve or twin cam/16 valve .
2.Crankshaft Locking,Camshaft Setting Tools, Tensioner Locking Pin.

Includes:Wrenches, Bits, Pliers,Insulation tape,Precision Screwdrivers,sockets,tape measure,test pen

Engine Timing Tool Kit for BMW 1, 3 and 5 Series with chain driven engines. Check, adjust and set the Camshaft timing and remove the Cam chain.

Includes: electric drill,electric power tools
precision screwdriver and socket
adjustable wrench
Long nose pliers
bits

This comprehensive engine timing tool set, enables the correct timing positions to be achieved on both camshaft and crankshaft .

Material:steel
Includes:bit holder,long nose pliers,hex key,sockets,bits

1.Enables the correct engine timing to be made when replacing the timing belt.
2.Suitable for Ford & Mazda & Volvo.

1. For locking the camshaft and crankshaft on Fiat 1.2 8V /1.4 16V.
2.Additional sprocket locking tool and alignment fixture for the 1.4 VVT engine.

Material: Stainless Steel
Utility knife

1.For timing the chain on 1.0/1.2/1.4 EcoTec twin cam engines.
2.Applications for Corsa, Agila, Astra, Tigra and Meriva.

Three socket sets in one,1/4"D &1/2"D with a comprehensive array of accessories including standard and deep sockets, ratchet and extension bars, etc.

1.Suitable For VW T5 As Of 2004, TOUAREG & Phaeton As Of 2003 With 5 & 10 Cylinder Engines.
2.Camshaft Locking Tools,Camshaft Gear Retaining Tool.

this is a professional hand tool set including:sockets, extension bars, sliding T bars, ratchet handle, claw hammer, PVC tape, bits, etc.

Suitable for VAG 1.6 and 2.0 TDI .Designed to fit the newest Common Rail diesel engines which are significantly different from the older PD engines

Suitable for timing 1.4 & 1.6 Valvetronic direct injection petrol, chain drive engines, fitted in BMW Mini, Citroen and Peugeot vehicles.

1.Suitable For VW T5 As Of 2004, TOUAREG & Phaeton As Of 2003 With 5 & 10 Cylinder Engines.
2.Camshaft Locking Tools,Camshaft Gear Retaining Tool.

1. Camshaft setting and flywheel locking tools.
2. For BMW M47/TU/T2 and M57/TU/T2 diesel engines, Land Rover, Rover/MG and Vauxhall/Opel model.

1.Designed for push back and wind back brake pistons.
2.Adaptor set applicable for wide variety of vehicles.
3.16 adapters and 8 pcs brake tools.

1.Built-in bearing makes balancer replacing job easy.
2.6-slot puller plate plus 9 threaded adapters fit to balancers on most cars.

Suitable for single, twin and quad camshaft
1.Camshaft Locking Pins(2)
2.Flywheel Plate Locking Tool
3.Flywheel Locking Tool with Bolts M6x90mm

1. for removal of seized Injectors on Citroen and Peugeot diesel HDi engines.
2. Removal injectors without removing the cylinde.

Suitable for removing the water pump on
Pumpe Duse, diesel, gear drive engines.
Essential to align the engine in the TDC
position.

1.For easily alignment of clutch disc and flywheel.
2.Suitable for most vehicles such as VW, BMW, Ford, Vauxhall, Renault.

1.For Volkswagen Audi Group (VAG) 1.4 and 1.6 FSi Petrol engines.
2.Contains crank TDC positioning, camshaft setting and tensioner lock tools.

1.Aluminum anodized cylinder and aluminum cylinder head.
2. To be widely used in auto repair,leak tests,experiments,vacuum packaging and so on.

1.For 2.5 / 2.8 CRD timing belt engines, Chrysler, Jeep and LDV.
2.Contains camshaft, crankshaft and balance shaft pins, plus tensioner adjuster.

1.Designed to remove wires from terminals without damage.
2.Also designed for Pack-Con and Weather-Pack terminals found on many GM vehicles.