brass terminal pin

PCB terminal pin terminal connector
Material: brass
Property: good soldering, tenacity
Tolerance:+/-0.05
Design: custom design

Multi-pin headers are often used in sensors applications, such as for rail industry.This industry requires rugged, moisture resistant sensors.

Radio frequency (RF) is a rate of oscillation in the range of about 3 kHz to 300 GHz, which corresponds to the frequency of radio waves.

Multi-pin headers are often used in sensors applications, such as for rail industry.

1. material: Brass
2. Stamping brass connector terminal pin
3. use for PCB connector
4. stamping process

Pin header:Tin-plated brass
Housing:PA66.
Temperature range:-40deg to +105deg
Max soldering:+250deg for 5 sec.

Multi-pin headers are often used in sensors applications, such as for rail industry.

Radio frequency (RF) is a rate of oscillation in the range of about 3 kHz to 300 GHz, which corresponds to the frequency of radio waves.

1.PCB screw terminal block 332J
2.its pitch is 5.0mm,which work together with KF332J .
3.We could proudce from 1 pins to 24 pins.

Temperature range:-40deg to +105deg
Max Soldering: +250dec 5seconds
Pin headers: Tin-plated brass
Housing: PA66

Temperature range:-40deg to +105deg
Max Soldering: +250dec 5seconds
Pin headers: Tin-plated brass
Housing: PA66

Automatic feed and pressure connection can be completed once for all.
Equipped with a protective unit on the pressure connection point, and it is saf

Screw:M3,Zinc-plated steel
Pin header:Tin-plated brass
Wire guard:Ni-plated phosphor bronze
Temperature range:-40℃ to +105℃

Screw:M2.5,Zinc-plated steel
Pin header:Tin-plated brass
Wire guard:Ni-plated phosphor bronze
Housing:PA66.UL94V-0
Max soldering:+250℃ for 5 s

Pin header: Tin-plated brass
Temperature range: :-40 - +105 ℃
Max Soldering: +250 ℃ for 5seconds
Withstanding voltage: AC2000V/1Min

Screw:M3,Ni plated steel
Terminal:Tin-plated brass
Housing:PA66.UL94V-0
Withstanding voltage:AC2000V/1min
Temperature range:-40℃ to +105℃

Pin header:Tin-plated brass
Wire guard:Ni-plated phosphor bronze
Housing:PBT.UL94V-0
Max soldering:+250℃ for 5 sec.
Torque:0.4Nm(3.5 lb.in)

Pin header:Tin-plated brass
Housing: PA66.UL 94V-0
Maximum soldering: 250℃ for 5 seconds
Temperature range: -40℃ to +105℃

stainless steel pin pad terminal/turning pins
Finish: Plain, zinc/nickel plated, tin plate
Process:automatic lathing and knurled

Insulation Resistance: 500M Ohm/1000V
Withstanding Voltage:AC1500V/1Min
Wire Range:24-12 AWG/2.5mm2

Pin header:Tin-plated brass
Housing: PA66.UL 94V-0
Maximum soldering: 250℃ for 5 seconds
Temperature range: -40℃ to +105℃

Reted Current:10A
Contact resisitance: 20M Ohm
Insulation Resistance: 500M Ohm/1000V

Pin header:Tin-plated brass
Housing: PA66.UL 94V-0
Maximum soldering: 250℃ for 5 seconds
Temperature range: -40℃ to +105℃

Multi-pin headers are often used in sensors applications, such as for rail industry.Well replaced the traditional rubber seal connectors.

ALLEN BRADLEY 1756-TBNH ControlLogix 20 Pin Terminal Block

Brass contacts for electric component, tin or silver coated are available.

1. 6-7mm strip length
2. 28-16AWG 0.5-1.5mm² wire range
3. 8A rated current
4. 300V rated voltage
5. AC1500V/1Min Withstanding Voltage

Characteristic:
Annealed material optimizes crimping properties.
Flat contact surface to avoid hotspot.
Precise sizes for simple cable

Stamping in the manufacturing sector as a domestic producer. We provide the best

1. Material::Brass/Copper
2. High qualityand low price
3. ISO9001:2008
4. OEM service