brass alloy wire

High resistance, low temperature coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature.

Nickel chromium alloy Ni80Cr20 Mesh/Screen: anti-corrosion, melting point of about 1400 °C (2552 °F).Carrier or conveyor belt used in high temperature

Invar 36 wire mesh/screen:Alloy 36 wire mesh-nickel iron alloy wire mesh:has thermal expansion of one tenth that of carbon steel up to 400ºF(204ºC).

CuNi10 wire: Cuprothal 15 wire, is a copper-nickel alloy wire with medium-low resistivity for low temperature resistances. Uses at temperature 400°C.

Nichrome 70/30 Wire Mesh is used as conveyor belt or carriers in Industrial furnaces (up to 1230°C) with alternating oxidizing/reducing atmosphere.

Copper Nickel C715 have excellent resistance to bio-fouling & corrosion in sea-water. high velocity.Wire: Diameter: 0.05mm-10mm. 0.02 Inch-0.3937 Inch

Nichrome 60/15 wire mesh/screen: Used as carrier belt or conveyor in high temperature. heating devices operating up to 1000 ℃(1850F).

Nichrome 37/18 wire has excellent resistance to high temperature oxidation, corrosion and good wear resistance. Wire diameter:0.05mm to 10.0 mm

Nichrome 20/25 wire mesh/screen is used in numerous domestic appliances and industrial resistors.Good resistance to oxidation at high temperatures.

Hastelloy C22 enhances resistance to pitting, crevice corrosion, stress corrosion cracking and oxidizing aqueous media.

High resistance, low temperature coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature.

Inconel 617 Wire: high-temperature strength,resistance to oxidation resistance,corrosive environment, reducing and oxidizing media.
Dia:0.05-10.0mm.

Monel alloy K500 Wire: Combines the excellent corrosion resistance of Monel 400 and the added advantage of greater strength and hardness.

Monel alloy 400 Wire: Corrosion resisting. Resistant to salt and caustic solutions, sea water and steam at high temperatures.Dia:0.05mm-10.0mm

Incoloy 800H Wire: Excellent corrosion resistance in the water media of the extremely high temperature of 500. Good stress corrosion resistance.

Copper-nickel alloys:Excellent Resistance to Corrosion and Bio Fouling in Sea Water, high resistance to sea water environments. Dia.0.05mm~10.00mm

Inconel 718 wire: Good resistance to a wide variety of corrosives, significantly better than martensitic, ferritic, and austenitic stainless steels.

Incoloy 330Wire:good high-temperature strength and corrosion resistance.Solid solution composition and not hard enable by heat treatment.Dia:0.05-10mm

Monel R-405 Wire:Good corrosion-resistance,weld ability and high strength.Resistant to sea water,steam salt and caustic solutions. Dia:0.05mm-10.0mm

Monel 404 Wire:low magnetic permeability,excellent brazing characteristics and good strength at outgassing temperatures.Dia:0.05mm-10.0mm

Monel 401 Wire: Good ductility,good brazing, low temperature coefficient of resistance and medium-range electrical resistivity. Dia:0.05mm-10.0mm

N-155 alloy wire: High temperature properties which are inherent&do not depend upon age hardening. Recommended for high stresses.Good oxidation resist

Hastelloy C aolly contains Cr, Mo and other elements. It has the ability to resistant oxidation and corrosion and its melting point is 1325-1370 ℃

Hastelloy B aolly contains Cr, Mo and other elements. It has the ability to resistant oxidation and corrosion .Its melting point is 1330-1380℃ .

Hastelloy X alloy wire contains Cr, Mo and other elements. It has the ability to resistant oxidation and corrosion . Its melting point is 2300-2470 ℃

Hastelloy B-3 Wire is a nickel alloy with resistance to pitting, corrosion, and stress-corrosion. And Hastelloy B-3 Wire melting point is 1065-1150℃.

Alloy 902 Mesh:nickel-iron-chromium alloy made precipitation hardenable by additions of aluminum & titanium.Mesh: 0.5-250mesh.

Nickel iron Nilo 42 wire is nickel-iron controlled expansion alloys with high magnetic permeability; Has low expansion till 300°C.Wire Dia. 0.05mm-10.

FeCrAl (0Cr21Al6Nb) Resistance Wire is made of iron chromium aluminum alloy. The scaling temperature is 1350°C (2462°F).

Nickel-Copper 23 mesh/screen: Very malleable and good resistance to corrosion until temperatures of 400°C. CuNi23 Mesh:0.5-250 mesh.