brass alloy wire

1.High resistance, low temperature coefficient of electric resistance
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.0mm

Ni-Span-C Alloy 902 Wire is a nickel-iron-chromium alloy made precipitation hardenable by additions of aluminum and titanium.Diameter:0.05mm-10.0mm.

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

15 Alloy Wire Mesh: the temperature coefficient of resistance is low.It can be used as general resistance wire mesh and core of low temperature heater

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

High resistance, low temperature coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature.

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

This alloy has very high erosion, corrosion resistance and very high weld ability.It gives the best service life under the most adverse conditions.

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

Incoloy DS Wire is alloy: Silicon is added. Good high-temperature strength and excellent resistance to oxidation and carburization.Dia:0.05mm-10.0mm

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

70/30 Nickel Copper Alloy Wire mesh have excellent resistance to bio-fouling and corrosion in sea-water
Mesh: 0.5-250mesh, Thickness:0.05mm above

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

90/10 Copper Nickel Alloy (C70600 )Wire has excellent resistance to corrosion and bio fouling in sea water
Mesh: 0.5-250mesh Thickness:0.05mm above

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

1.max working temperature: 950° C
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

low resistivity and high temperature coefficient of resistance. Good workability and high-temperature strength.

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

Inconel 625 wire has the best all-round combination of strength and corrosion resistance of the Inconel family of alloys.Diameter: 0.05mm-10.0mm.

Inconel 600 wire:corrosion resistance to many corrosive media. Excellent resistance to oxidation at high temperatures.Diameter: 0.05mm-10.0mm.

Inconel 725 wire is highly resistant to corrosion & age harden-able for extreme high strength. Used for high strength fasteners in marine application.

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

FeCrAl resistance wire: superior oxidation resistance, lower raw-material cost, density and thermal expansion coefficient than Ni base super alloys

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Mesh: 0.5-250 mesh/Inch Thickness: Min0.05mm

FeCrAl 1Cr13Al4: Ferritic alloy. Is used in surtur & sulfide environment & producing industrial electric furnace, household electrical appliances.