blowing molding machine

1. High-quality material adopted
2. Wear resistant and corrosion resistant
3. On time delivery
4. Technical supports available

Silicon Injection Molding Machine,Rubber Injection Molding Machine

1. high performance and stable injection 2. external bending clamping structure 3. bigger space between tie-bars 4. longer opening stroker

DKM: Main > Common Standard Machine > Variable Injection Molding Machine >
DKM330H pump injection machine
DKM330H PLATEN DIMENSION MACHINE DI

This is a vertical plastic injection molding machine.

This machine is suitable for each kinds of cotton material.The bullet mold thermo-compression and finalize the design.

The 2L-16Lstation blow moulding machine is different from the single station machine

DKM218H PLATEN DIMENSION DKM218H dakumar Injection Molding Machine DKM218H Parameters A B C INJECTION UNIT Screw Diameter mm 45 50 55 Screw L/D Ratio

DKM188H PLATEN DIMENSION MACHINE DIMENSIONS DKM188H dakumar Injection Molding Machine DKM188H Parameters A B C INJECTION UNIT Screw Diameter mm 42 45

Features:
1) Uses PLC programmable controller and touch screen to finish the auto-cycle
process of opening-closing mold, feeding, heating, h

Features:
1) Pneumatic system controls the opening-closing mold, negative pressure feeding,
heating, heat preservation, air cooling, demould

The machine is integrated with high pressure suction system for cooling with strong penetrability,favorable adhesivity and low consumption of steam.

 
Purified Water PET Bottle Blowing Machine 90 - 180 PCS/H
&n

Blow Molding Machine is used for producing high quality plastic bottles and containers.

Temperature control for Blow Molding Machine
1\Hot medium liquid: water or oil convertibly.
2\Vertical pump.
3\Stainless medium tank.

Productivity:1;Packing:plank;DeliveryDate:35;PaymentType:T/T;Trademark:Angel;

Clamping system: Faster response, steable and high rigidity
Injection system: Accurate and flexible, lower rejection rate

1.Vertical clamping, vertical injection .
2.Suitable for insert molding .

This machine is suitable for each kinds of cotton material.The bullet mold thermo-compression and finalize the design.

High production efficiency.The production cycle of each plate is 4-8min.Automatic pneumatic charging shorten the production time.

1. screw barrel
2. for many kinds of plastic machines
3.material and size can be customed

The MS65 steamed bun forming & conveying machine is designed by our factory in terms of the specific market demand .

Depth of Nitration Layer: 0.5-0.8mm; Hardness of Nitration: 950-1020Hv; Fragility of Nitration: Less than grade 1; Surface Roughness: Ra 0.4 um

Thermostat for Plastic Injection Molding Machine
1\Hot medium liquid: water or oil convertibly.
2\Vertical pump.
3\Stainless medium tank.

SPZ 1400*1200MM EPS seed tray mould are made by high-quality aluminum alloy, with Teflon coating, assembled by standard steam frame and cooling system

plastic injection molding machine Plastic Injection Molding

We can supply Automatic & Semi-auto PET bottle Blow Molding Machine for 0.1L-25L PET bottles with the auxiliary compressor, air dryer and filter conce

Cold Runner Medical Plastic Injection Molding For

Cold Runner Medical Plastic Injection Molding For

Pulp Molding Machine
Easy to use Pulp Molding Machine
4*8 chunks Pulp Molding Machine
Pulp Molding Machine control by PLC