bend sheet metal

There are many different metals which can be manufactured into sheet metal, such as aluminum, brass, copper, steel, tin, nickel and titanium.

Delem CNC control system
It could cut 25mm steel
CE,ISO certificates are available
Press brake MB8-600T/4000
With high precision

Uses: widely applied to platform, pathway, bridge, trench covers, fences and handrails at systems of petro-chemicals, urban construction engineering

1. Plsmall sheet metal Plegadora
Steel-welded construction, vibration to eliminate stress, with high strength and good rigidity.

Feature of sheet metal reducer brackets
1. Filler Panels, Angle Brackets, Reducer Brackets
2. Supports 200 lbs sold in pairs.

perforated metal sheet:
Hole Size: 0.1MM-100MM
Thickness: 0.1MM-8.0MM
Width: 0.1m-1.5m
Length: up to 4m

perforated metal:
1.material:low carbon steel plate,stainless steel plate,aluminum plate,Al-Mg alloy plate
2.weaving and characteristics:punched

D.Q metal suppliesan infinite variety of custom metal fabrications and specialty hinges to a wide range of industries including Electronics, Medical,

1. Cuttng 6mm thickness 4000mm length metal plate
2. With CE,ISO,SGS certificate
3.Simens motor
4. ESTUN E21
5. Bosch valve

Expanded Metal Sheet is made of steel Plate, aluminum plate, stainless steel plate, titanium plate, alumplatinum plate, lead plate, nickel plate, etc.

1.sheet metal bending brake
The hydraulic system adopts the integrated one, which helps to reduce piping connection, eliminate oil leakage

Feature of sheet metal panels fabrication
We can produce quantities varying from prototypes to large production runs of thousands of pieces.

perforated metal sheet:
Hole Size: 0.1MM-100MM
Thickness: 0.1MM-8.0MM
Width: 0.1m-1.5m
Length: up to 4m

Titanium expanded metal is made of high quality Titanium sheet/coil after being expanded on the automatic expanded machines.

(D.Q)We are from design and fabrication in our factory to installation and mechanical contracting on your position.

1.guillotine for 16mm thickness 3200mm length metal sheet
2. With CE,ISO,SGS certificate
3.Simens motor
4. CNC controll and Bosch valve

1.guilhotina for cutting sheet metal
Performance:The frame is entirely welded with steel plates, vibration to eliminate stress.

As a well established a sheet metal stamping manufacturer, we will supply you the metal stamping parts in various industries manufacture.

perforated metal sheet:
Hole Size: 0.1MM-100MM
Thickness: 0.1MM-8.0MM
Width: 0.1m-1.5m
Length: up to 4m

1. Cuttng 20mm thickness 4000mm length metal plate
2. With CE,ISO,SGS certificate
3.Simens motor
4. ESTUN controller
5. Bosch valve

1.Electrical parts: SIEMENS
Hydraulic drive, swing beam, return of knife is smooth and prompt by accumulator nitrogen cylinder

D.Q Sheet Metal is a full service sheet metal installation and fabrication company. We have the experience and the knowledge to deliver the best parts

SMS104-OEM is the sheet metal stamping in galvanized steel, which is our custom metal stamping, used in firebox of electrical /gas fireplace.

perforated metal sheet:
Hole Size: 0.1MM-100MM
Thickness: 0.1MM-8.0MM
Width: 0.1m-1.5m
Length: up to 4m

1. Cuttng 12mm thickness 8000mm length metal plate
2. With CE,ISO,SGS certificate
3.Simens motor
4. ESTUN controller
5. Bosch valve

1.CNC CONTROL IN BACK STOP
Rake angle can be varied to permit shearing of higher thickness than nominal capacity & facilitating distortion free shea

Feature of sheet metal casing
Material:CRS
Finish:Nickel Plating (RoHS)
We can design the sheet metal casing as per your drawings or sample

perforated metal sheet:
Hole Size: 0.1MM-100MM
Thickness: 0.1MM-8.0MM
Width: 0.1m-1.5m
Length: up to 4m

1. Cuttng 10mm thickness 2500mm length metal sheet
2. With CE,ISO,SGS certificate
3.Simens motor
4. ESTUN controller
5. Bosch valve

1.sheet metal press brake
The precision repeatability to JUGAO SERIES CNC PRESS BRAKE performing is achieved by synchronizing the hydraulic