ball fiber machine

FIBER CABLE BLOWING MACHINE EQUIPMENTSr

 
2D code / texts / photo / image / seri

Glass, Carbon ,Aramid ,Dacron ,Waste Textile ,Old Cloth, Polypropylene,Polyester,Terylene ,Spandex, Kevlar, Nonwovens Non-woven Fiber Cutting Machine

Machine can cut both sheet and tube metal, adopts imported Japanese Panasonic servo motor and driver and American laser mech laser head.

PAS image digital processing system,core to core alignment;
Apply to bare fibers, skin line cables, jumper cables, etc.;
Various display group, max

PAS image digital processing system,core to core alignment;
Apply to bare fibers, skin line cables, jumper cables, etc.;
Various display group, max

PAS image digital processing system,core to core alignment;
Apply to bare fibers, skin line cables, jumper cables, etc.;
Various display group, max

5.6 inches high Resolution LCD display
Average splice time: 8 seconds
Average tube-heat time: 30 seconds

Color LCD monitor & 256 magnification
Compact & Light weight
Reversible monitor with control panel on each side

High definition LCD display
PAS technology
Core or cladding alignment
Double heaters,30 Sec. tube-heat time
3 magnification modes, max. 360 m

FIBER CABLE BLOWING MACHINE EQUIPMENTS

1.Working area: 3000*1500mm
2.Cutting material: metal
3.Fully automatic ultra-fast exchange table,Remote fault detection,Imported component

Fiber Laser Cutting Machine is used for cutting steel, aluminum, titanium, copper and other metal materials with higher laser cutting quality, speed.

Fiber Laser Cutting Machine is used for cutting steel, aluminum, titanium, copper and other metal materials with higher laser cutting quality, speed.

This is carbon fiber mixing with the resin PE,ABS,AS,PBT,PET,PA,PC,PPS by twin screw extruder
high performance by advanced technology process

PAS image digital processing system,core to core alignment;
Apply to bare fibers, skin line cables, jumper cables, etc.;
Various display group, max

5.6 inches high Resolution LCD display
Average splice time: 8 seconds
Average tube-heat time: 30 seconds

Ultra-compact, detachable marking head, handheld marking can be used for marking objects in different locations

excellent cutting speed,
high stability and photoelectric conversion efficiency
low use and maintenance cost

Fiber Cement Board Making Machine

1. high efficiency design
2 Melt Spinning Machine is used for spinning 2dtex~20dtex chemical fibre by melting polyester chip
3 Easy operation

high quality high stability low noise fiber laser marking machine for metal and nonmetal..including 30w,50w,80w,100w. working area:100*100mm,200*200mm

fiber laser marking machine
1.Two years warranty
2.pbmachine(at)possiblemachine(dot)net

Features:
Small volume,light weight;
Designed by FTTH requirements of construction;
Apply to bare fibers,skin line cables,jumper cables, etc;

  Optical Fiber Ferrule Bonding Machine

high quality high stability low noise fiber laser marking machine for metal and nonmetal..including 30w,50w,80w,100w. working area:100*100mm,200*200mm

high quality high stability low noise fiber laser marking machine for metal and nonmetal..including 30w,50w,80w,100w. working area:100*100mm,200*200mm

New replacement screws and barrels from China for lower cost than refurbished ones. Try it and believe it, with satisfactory quality and cost saving f

Awire Optical High Precision Fiber Cleaver FC-6S for FTTH
SKYPE:Awire FTTH
factory outlet,fast deivery,door

This Micro Duct PE Silicone Pipe Machine use to produce two layers duct PE pipe,called HDPE Microducts, this kind of pipe is used in Telecommunication