auto screen changer

There is no need of manual operation of the screen changer because the material fluid inside flows by itself under the pressure caused by the melt pro

plastic melt filtration system-automatic mesh belt screen changer
non-stop the on-going machine, no manual operation
no interrupted the production.

1,plastic extrusion line-hydraulic screen changer and extrusion mold
2, non-stop the working machine when change the screen
3, leak-free mold

1, Dual-plate hydraulic screen changer with double working position
2,screen changer especial for foaming products and cast film
3, leakfree

1,Automatic belt screen changer-plastic extrusions & melt filter
2,continuous, fully automatic screen changer from DEAO
3, automatic screen changer

plastic melt filtration system-double pillar screen changer
1,non stop of the on-going extrusion plant.
2, no interrupt the production

1,Single plate continuous screen changer for foaming board extrusion line 2,ISO9001:2000, CE approved.
3,Initiator of new screen changer in China

1, double chanel double screen, screen changing one after the other
2,no interrupt the production
3, non stop the working machine

Back flush screen changer for plastic recycling water-ring cut granulator
self-cleaning system, ni need to change the screen.no interrupt production

1, single plate continuous hydraulic screen changer for polymer filtration
2,non stop the on-going machine , no interrupt of production

single plate continuous screen changer for plastic extrusion machine
continuous type, no disturb the production

new continuous hydraulic screen changer -single plate type
based on the single plate one, but it's a continuous one, no interrupt the production.

1,HIgh operational reliability
2,Leak-free mode of operation
3,Low pressure consumption
4,Double pillar screen changer for extrusion lines

Hydraulic screen changer-melt filter for plastic extrusion machine
no interrupt the production when change the screen

1,Automatical and continuous screen replacement without manual operation
2,No fluctuation of material flow,no product deformation

1,New continuous screen changer for XPS/EPE/EPS foaming products
2,screen changer especial for foaming products and cast film
3, leakfree material

1,single plate type double -working station screen changer
2, no materual leakage
3, non -stop the working machine

1, Leak- free mode of operation
2,High operational reliability

pressure sensor -auxiliary parts of our screen changer
Measuring and monitoring the pressure of the melt fulid to the screen changer

1, Plate type hydraulic screen changer/melt filter for PP pipe extrusion line
2, screen change on line, without machine shut down
3, Agent wanted

1,Double piston double working position screen changer/melt filter DHZ-2-600
2, No disturb the production
3,continuous screen changer

1,Hydraulic screen changer/ melt filter for single layer/multi-layers extrusion line
2,ISO9001:2000, CE approved.
3, widey used in the world

1,Automatic uninterrupted continuous polymer filtration
2, Automatically screen replacement, no need mannual operation
3, the pressure is stable

1,screen life increased as many as 100 times or more (depending on the density of the screen)
2,increased output due to lower backpressure.

No material leakage
Fine design struction screen changer
Application for almost all the plastic processing factory

A frequency converter simple and clear operation, integrated pressure control and easy fault diagnosis via error codes.a price-optimised automation.

1,Especially for foaming plate products, such as XPS,EPE,EPS and cast film
2,Ensure the screen changing without machine halt or production interrupt.

Double flow channels
Both channels work at same time
One piston works while the other one is replaced
No flow stop.
High efficiency in changing.

Hydraulic station by integrated blocks or valves, electric tank, combination, and accumulator. is power system of screen changer changing and cleaning

The full automatic belt screen changer is mainly composed of the screen changer, the heating and cooling system, and the electric control system.