asbestos

Manufactured from asbestos beater sheet with tanged (perforated) of 0.18mm ~ 0.25mm tinplate inserted reinforcement.

Manufactured from asbestos beater sheet with tanged (perforated) of 0.18mm ~ 0.25mm tinplate inserted reinforcement.

Manufactured from asbestos beater sheet with tanged (perforated) of 0.18mm ~ 0.25mm tinplate inserted reinforcement.

NGP-SB400 is mainly made of high temperture resisting synthetic fibre, Kevlar fiber and NBR binder.

General purpose commercial material suitable for oils, fuels, low pressure steam, water and gases

NGP-SB420 Non Asbestos beater Sheet & non-asbestos paper gasket mateirals (NBR Binding) have good compressibility and recovery in small surface.

NGP-SB420 Non Asbestos beater Sheet & non-asbestos paper gasket mateirals (NBR Binding) have good compressibility and recovery in small surface.

 
Calcium Silicate Board Insulation , Calcium Silicate Slab
&

 
Fire Resistance Calcium Silicate Block With 3V Grooves
&nbs

All our Asbestos Products are manufactured from high grade white Chrysotile Asbestos.
All packings are available in braided rope form (standard/cust

All our Asbestos Products are manufactured from high grade white Chrysotile Asbestos.
All packings are available in braided rope form (standard/cust

All our Asbestos Products are manufactured from high grade white Chrysotile Asbestos.
All packings are available in braided rope form (standard/cust

All our Asbestos Products are manufactured from high grade white Chrysotile Asbestos.
All packings are available in braided rope form (standard/cust

All our Asbestos Products are manufactured from high grade white Chrysotile Asbestos.
All packings are available in braided rope form (standard/cust

Instead of conventional asbestos filler, this type uses inorganic fibers and aramid fibres as a nonasbestos paper filler.
Feature
1. Asbest

Typical Application
1. Mainly used for the equipment in acid
2. Sealing gaskets for the flange of pipeline joint.

Premium quality compressed fiber jointing based on Aramid fiber, Synthetic fiber with NBR binder.

Manufactured from asbestos beater sheet with tanged (perforated) of 0.18mm ~ 0.25mm tinplate inserted reinforcement.

Zhejiang Green Eco Friendly Cement Board is made using the revolutionary HPSC technology. This unique technology makes these boards

CNA3000 Non asbestos Sheet
Premium quality compressed fiber jointing based on Aramid fiber, Synthetic fiber with NBR binder.

 
Asbestos Diaphragm Cloth For Water Electrolytic Cells Diaphragm Mater

 
High Temperature Resistant Fire-proof <span style="font-family: arial,helvetica,sans-s

Asbestos Jointing Sheet With Wire Reinforced
Max working temperature: 450C.
Working pressure: 8Mpa

DESCRIPTION:
RS-5009 Reinforced Asbestos Composite Gasket Sheet is made from asbestos beater sheet with mechanically clinched to 0.18 ~ 0.25mm ...

Oil Resistance Asbestos Jointing Sheet
Working pressure: 1.5Mpa
Max working temperature: 150C

Asbestos graphite packing without oil
Resistant to alkaline solutions
Density (g/cm3):1.4-1.6

oil-resistance asbestos rubber sheet,oil-resistance asbestos seal gasket,oil-resistance gasket materials

All our Asbestos Products are manufactured from high grade white Chrysotile Asbestos.
All packings are available in braided rope form (standard/cust

Aidmer76-004 Beater Asbestos Head Gaskets Sheets
(Asbestos Cylinder Head Gaskets)
Beater Asbestos Head Gaskets Sheets is low density, high per

RS-5006 non-asbetos joint sheet is made from Kevlar Aramid fiber,Vegetable fider, Mineral fiber Compressed and calendered under high temperature and p