aluminum alloy wire

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

Inconel 725 wire is highly resistant to corrosion & age harden-able for extreme high strength. Used for high strength fasteners in marine application.

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Mesh: 0.5-250 mesh/Inch Thickness: Min0.05mm

FeCrAl resistance wire: superior oxidation resistance, lower raw-material cost, density and thermal expansion coefficient than Ni base super alloys

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Mesh: 0.5-250 mesh/Inch Thickness: Min0.05mm

FeCrAl 1Cr13Al4: Ferritic alloy. Is used in surtur & sulfide environment & producing industrial electric furnace, household electrical appliances.

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Mesh: 0.5-250 mesh/Inch Thickness: Min0.05mm

Nichrome 80/20 wire has excellent resistance to high temperature oxidation & corrosion & good wear resistance.Good deformation. Diameter10.0 mm-0.05 m

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Mesh: 0.5-250 mesh/Inch Thickness: Min0.05mm

A nickel-base alloy with exceptional combination of oxidation
resistance, fabricability and high-temperature strength.
Wire Diameter:0.05mm -10.0mm

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Mesh: 0.5-250 mesh/Inch Thickness: Min0.05mm

FeCrAl 0Cr27Al7Mo2:High temperature wire. Used in appliances where it has high resistivity and good oxidation resistance are of particular importance.

FeCrAl 0Cr21Al6Nb is ferritic iron-chromium-aluminium alloy which is used at temperatures to 1350°C.Used in high-temperature furnaces in heat treating

FeCrAl 0Cr21Al4 alloy can replace Kanthal series. It is used for industrial furnaces, kilns & other equipment with highest operation temperatures.

It has characteristics of high resistance,low temperature coefficient of electric resistance, high operating temperature & good corrosion resistance.

H13YU4 (0Cr13Al4) posses the characteristics of high resistance, low temperature coefficient of electric resistance and good corrosion resistance.

Nichrome 40/20 wire has excellent resistance to high temperature oxidation, corrosion and good wear resistance. Wire diameter:0.05mm to 10.0 mm

Invar alloy contains iron, nickel and carbon and is expansion alloy. It has been used in a wide variety of glass-to-metal sealing applications.

Invar 36-Alloy 36: possessing a rate of thermal expansion approximately one-tenth that of carbon steel at temperatures up to 400ºF Diameter:0.05-10mm

Haynes Alloy is a cobalt-based alloy which combines good formability and excellent high-temperature properties.
Mesh: 0.5-250 mesh/Inch

CuNi23 wire is a Copper-nickel alloy wire(CuNi alloy) with medium resistivity for medium-low temperature resistances.Good resistance to corrosion.

Incoloy 825 mesh/Screen:High resistance to reducing-oxidizing acids;resistant to aqueous corrosion,sulfuric,phosphoric acid.High Bearing ability

Nichrome 20/35 wire has excellent resistance to high temperature oxidation, corrosion and good wear resistance. Wire diameter:0.05mm to 10.0 mm

Nickel 205 wire is a wrought nickel similar to Nickel 200 but with compositional adjustments to enhance performance in electronic applications.

CuNi6 wire is Cu-Ni resistance alloy wire,this alloy has low electrical resistivity and is solderable.Diameter: 0.05mm-10mm. 0.02Inch-0.3937Inch.

Nichrome 60/15 has good deformation ability thermal stability, mechanical character, resistance to high temperature, oxidation corrosion 0.05mm-10mm

FeCrAl 0Cr25Al5 is a high-temperature ferritic Alloy. Is used in electrical heating elements in industrial furnaces and in the appliance industry.

FeCrAl H23YU5(0Cr23Al5) is widely used in household electrical appliance,heating elements,mechanical manufacturing and other industrial fields.

Nickel 233 wire is a commercially pure wrought nickel alloy combining excellent corrosion resistance with high electrical and thermal conductivities.

Nickel 220 alloy wire is very similar to Nickel 205 wire, except with a chemical composition controlled specifically for application as cathodes.