active rfid reader

Rfid card reader,Color TFT screen with GUI Interface,Built-in USB port allows for manual data transfer,SDK available for OEM customers and software.

This 4 antenna port UHF RFID module is equipped with Impinj R2000 Chip, It could work in long range reading UHF RFID reader.

Integrated reader is a industry grade products for open air which adopts engineering plastic case.

RFID HANDHELD READER, Protocol: ISO18000-6B and ISO18000-6C/EPC Gen2, Standard: supports UHF read, WIFI, bluetooth, 1D barcode, Options:GPRS, etc.

handheld rfid reader For Warehouse Management
1:Low cost, more economical than handheld reader integrating with PDA;

1. RR7036SR support Multiple Protocols
2. Built-in TX/RX antenna with effective distance up to 15cm

Access Control No Keypad Wiegand RFID Card Reader
Nice light
Stable Reading distance
Popular Model + Waterproof

Support ISO14443A, ISO14443B,ISO7816. the module built in antenna. Excellent quality and use widely in desktop and handheld reader. Competitive price.

Windows Mobile 6.1 / Chipset: XScale PXA300/310 624MHz/3.5''QVGA/GPS SiRFIII GPRS/CDMA/EDGE/EVDO/HSDPA/IP64/Frequency: 13.56MHz

 
123*94*29mm UHF Desktop, Small Close-Distance Passive RFID UHF Reader and Writer, 860-

3 to 15 meters reading distance;hand-free in/out of parking lot and all-in-one card function in access control system

This series of reader with high sensitivity receiver,small operation current,single DC power supply,low price,and high reliability.

1.RFID Moudle/125KHz module
2Low cost
3RFID proximity module
4supporting TI,HitagS,TK5557,EM4100

 
 
Keypad Waterproof RFID Card Reader with Wiegand Output
 

HYM750 UHF RFID reader uses R2000 chip, which complies with EPC C1G2
protocol, its working frequency is 840~960MHz,with LBT function.

PR9200 Chip
The reading distance is 0.8 meters connected to 2dBi antenna.Suitable for portable RFID reader, USB RFID reader

●Support both ISO-18000-6B and ISO 18000-6C(EPC C1G2)..
●Two outer antennas can be connected.
● Customized working frequency

AK-HR003 is a handheld ( mobile) reader, it's designed for relatively long distance data collection, the max reading distance up to 8 meters.

Fixed Reader can connect 1-4 different gain antenna by cable to control reading effective range. It can applies for multi point reading environment

  CR508A is 13.56 MHz TypeA USB emulation keyboard reader , it supports Mifare and ISO 14443 A Cards type like Mi

1.Handheld RFID reader
2.WIFI GPRS
3,RFID ISO14443 ISO15693
4,UHF ISO180006C GEN2
5.CE approved IP65

Protocol: ISO18000-6B or ISO18000-6C (EPC G2)
Working frequency: 902MHz-928MHz or 868MHz or 860MHz-960MHz

 
IP65 Waterproof Mobile Rfid Reader with 4.3 inch Large Touch Screen
 
 
<stron

Wireless Wiegand 26 Bits 125KHz RFID Door Reader for Card Access Control System
 
 
Sp

UHF LONG RANGE RFID READER
Protocol: ISO18000-6B and ISO18000-6C/EPC Gen2
can connect with 1~4 external antennas
communition port: RS232, RJ45

1. Read distance>1000mm, Write distance>100mm;
2. UHF RFID Reader Module
3. Customized supported

3 to 15 meters reading distance; hand-free in/out of parking lot; no interference from the ajacant lane

ET7131 RFID Reader is mainly used in schools, residential security, plant access, government access control, automotive systems.

Waterproof EM Proximity Card 125KHZ Wiegand RFID Reader
Nice light
Stable Reading distance
Popular Model + Waterproof
One year warranty

Impinj R2000 Chip, 400tags/s
The reading distance is 24 meters connected to 12dBi antenna.