5 way solenoid valve

specialized in production of pneumatic tools and pneumatic machine elements: solenoid valve, cylinder, air source treatment unit, pneumatic accessory.

1.Pilot diaphragm drive, normally open.
2.Orifice: 16mm
3.Can be operated directly without pressure.

Our company products, solenoid valvel,solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 st

Type:Normally close
Sealing materials: NITON
Orifice:2mm
Voltage:AC110V AC220V 24V DC 12V DC
Operating Temperature: -10~150°C...

usually an actuator, allowing a relatively small signal to control a large device.

We are leading producer and exporter of Five Port Three Position Solenoid Valve pneumatic air Solenoid Valve.

3way miniature water solenoid valve G1/8''
Medium: liquid, gas, oil (below 20cst)
Sealing material: FKM
Body material: brass
temp.:-10~130

2 way Solenoid Valve water
1.Normally Closed, Brass body
2.low power consumption,1 million times life testing
3. Direct Drive Type,High Quality

Working Medium :Air,Water,Steam
Motion Pattern :Guide Type

1.High quality,long life cycle
2..Working Medium 40 Micron Filtered Air
3.Motion Pattern Inner Guide Type

Available excavator Model number:DH220-5 S220LC-V motor
Available excavator part number: 2523-9016
High quality ,fast delivery, good after-service

specialized in production of pneumatic tools and pneumatic machine elements: solenoid valve, cylinder, air source treatment unit, pneumatic accessory.

3V: 3 Way
4V: 5 Way
Pneumatic Control Valve
Air Valves

Pilot diaphragm Direct acting
Standard voltage: 220VAC, 110VAC, 24VDC
DIN43650A connector

1.Pneumatic 5 2 way solenoid valve
2. 5 ways
3.FACTORY
4.Delivery soon in stock

Available excavator Model number:PC200-5
Available excavator part number:20Y-60-11713 20Y-60-11712
High quality, fast delivery,good after-service

water filter solenoid valve with 1/4"NPT male thread inlet/outlet port.
solenoid valve for water filter.
CE certified water filter solenoid valve.

specialized in production of pneumatic tools and pneumatic machine elements: solenoid valve, cylinder, air source treatment unit, pneumatic accessory.

Our company products, solenoid valvel,solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 st

4V100-400 Series Solenoid valve,
4A pneumatic control valve,
DLV series solenoid valve,
Standard Voltage: DC12V, DC24V. AC24V, AC110V, AC220V,

is specialized for PO machine, water Purifier, water dispenser.
Medium: water, air, vacuum. Temp.:0-100 degree
Body material: PP+Fiber glass, brass

1.Thread: BSPT, NPT , BSP.
2.Valve body material is brass.
3.Can be operated directly without pressure.

Basically speaking, ZS valves has similar properties like UW series valves.

solenoid valve is the interface between electronic controllers and pneumatic systems.

Available excavator Model number: PC120-5 PC60-6 4D95
Available excavator part number: 203-60-56560
High quality,fast delivery, good after-service

Price:US$2100.0;Productivity:50 Thousand;Min. Order:10 pcs;Packing:Carton, Wooden Case;Transportation:By Sea or By Air;DeliveryDate:15 Days;PaymentTy

specialized for PO machine, water Purifier, water dispenser,
Medium: water, air, vacuum
Temperature.:0-100 degree
Body material: PP+Fiber glass

4M310-10 5 way Namur solenoid valve is pneumatic valve controlled by micro electric signal with small dimension,large flow,reliable performance long

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

specialized in production of pneumatic tools and pneumatic machine elements: solenoid valve, cylinder, air source treatment unit, pneumatic accessory.