4 way valve

Ordering Code: KLA-06 KLA-08 KLA-10 KLA-15 KLA-20 KLA-25 KLA-32
Working Temperature: -5-50℃
Pressure range: 0.15-0.85 Mpa

3-Way Stopcock with male luer lock and two female luer connectors

Pneumatic foot operated valve plastic pump with lock and cover 4F210-08 1/4" BSP NPT
plastic;
5 way;
lock.

Two-way Check valve
HV-CV06
OEM:434 208 009 0
Ports:Port1=M22x1.5
Port 11,12,2=M22x1.5

TSV875321M 1/4" 5/3 way Mechanical Lock type
TSV87532S 1/4" 5/3 way Spring Reset type
TSV87533M 3/8" 5/3 way Mechanical Lock type

miniature high pressure brass 2 way solenoid valve half inch
Media: oil, gas, liquid
Sealing material: PTFE
Mode of action: pilot operated type

Pilot diaphragm Direct acting
Standard voltage: 220VAC, 110VAC, 24VDC
Proof pressure: 10 Bar
Protection class: IP65

2/2 way solenoid valve ,orifice from 1.2 to 4mm ,connection size from 1/8" to 3/8" ,working pressure :0-7BAR ,valve body: brass or stainless steel ,

Price:US$2100.0;Productivity:50 Thousand;Min. Order:10 pcs;Packing:Carton, Wooden Case;Transportation:By Sea or By Air;DeliveryDate:15 Days;PaymentTy

Small size and easy assembly.
Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: ± 10% ,DC Voltage tolerance:±1%.

Thread: BSPT, NPT , BSP.
The standard product fluid temperature is 80°C(NBR).
Temperature:Viton(130°C), Silicon(130°C), PTFE(185°C).

1.Pilot diaphragm drive, normally open.
2.Orifice: 20mm
3.Can be operated directly without pressure.
4.Standard voltage : 24VDC,110VAC, 220VAC

2/2 way solenoid valve ,orifice from 16 to 50mm ,connection size from 3/8" to 2" ,working pressure :0-7BAR ,valve body: brass or stainless steel ,

2W Series Brass Solenoid Valve
1.Normally Closed, Brass body
2.Port Size :1 1/4 inch,Working Pressure : 0~5 KGF/CM
3.It can use in Water,Oil,Gas

3R Series push pull valves
1.Port Size:1/4",Spare parts can supply
2.Materials: aluminum,stainless steel and nitric rubber
3.3 way solenoid valve

auto-control solenoid valve
1)body material: brass and stainless steel
2)three way magnetic valve
IP65 water air oil G1/4" auto-control solenoid v

Brass mini 2 Way solenoid valve
1.Normally Closed, Brass body
2.Spare parts can supply
3.Single action and double action types for your selection

It with the port size of G1/4 for inlet and outlet, and G1/8 for exhaust.

ISO/OEM/OD CERTIFICATION
ZERO PRESSURE LONG LIFE
COULD DESIGN AND PRODUCE AS YOUR REQUIREMENTS
GOOD QUALITY AND REASONABLE PRICE

Productivity:100,000,000.00;Min. Order:1 pc;Packing:white carton;Transportation:By Sea, air, express;DeliveryDate:immediately;PaymentType:L/C, T/T, o

2S025-08 1/4 Ports Stainless Steel Water Solenoid Valve
1. Good quality with low price
2. Hot product in the world
3. Good service

F series foot valve have 1/4'', M5 and 1/8'', including 3/2, 4/2 and 5/2, spring return type, with lock, with cover, with lock and cover type

Body: SS316
The standard product fluid temperature is 80°C(NBR)
Orifice:2.5mm

Orifice: 1.2mm
Plug NBR.Viton .Silicon, PTFE
Pressure range: 0-2.0Mpa

PU225 Solenoid Valve is normal closed type

2L Solenoid Valve is steam type.

F series foot valve have 1/4'', M5 and 1/8'', including 3/2, 4/2 and 5/2, spring return type, with lock, with cover, with lock and cover type

1/16'' Diaphragm check valve/shut off valve/stop valve/plastic valve (DCV116DVN)
Product detail
Body material: PVDF
Diaphragm material: VITON

PU series solenoid valve is used for air ,water, oil. It's easy to maintain and operate.long service life.

RO Part
four way valve
material:pp