4 way valve

Cartridge valve control flow or pressure
Fluid Temp:-25~80
Maximum Pressure:35(Mpa)

high pressure manifold valve
2 way full port
high pressure 31.5mpa
carbon steel material

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

3way miniature water solenoid valve G1/8''
Medium: liquid, gas, oil (below 20cst)
Sealing material: FKM
Body material: brass
temp.:-10~130

Working Temperature -20 to +85℃
Protection Class IP65
Coil Insulation Class F
Working Pressure 0.35-0.85Mpa

high pressure manifold valve
2 way full port
high pressure 31.5mpa
carbon steel material

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

3 way G1/8'' Solenoid valve asco
Medium: water, air, oil
Temp.: -10~130 degree
Sealing maerial: FKM
Protection class: IP65

Body SS316
Coil Special Copper Wire (H)
Standard voltage : 24VDC,110VAC, 220VAC
DIN43650A connector Coil is interchangeable

PN: 315~500bar
DN: 04~50mm
thread type
carbon steel materials
NBR/FPM airproof

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

Many kinds of solid horizontal pressure diaphragm, has a reliable performance with low coil power, is better for industrial system, such as PC, PLC.

1.Pilot diaphragm drive, normally open.
2.Orifice: 25mm
3.Din43650A connector coil.
4.Standard voltage : 24VDC,110VAC, 220VAC

High pressure ball valve
Male thread join or Flange connection
Main usage: Marine
DN 10, Thread: M27X1.5

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

suit to water,hot water,gas,freon

Body Cast Bronze/ Forge Brass/Zinc Alloy
Coil Special Copper Wire (H)
Core Stainless Steel

hydraulic ball valve supplier:
1. high pressure 7250psi
2. two way full port dn13
3. steel material
4. zinc alloy handle

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

1.Body:Cast Bronze/ Forge Brass/Zinc Alloy
2.Orifice: 40mm
3.Din43650A connector coil.
4.CV=28

industrial valve
high pressure 315bar
male thread M36x2
3 way L port

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

1.Model: 2V025-06 2V025-08 3V025-06 3V025-08 2V035-06 2V035-08
2.Direct acting
3.Normally closed or Normally open
3.Protection class: IP65

carbon steel valve
BSP female 2 inch
high pressure 315bar
3 way full port dn50

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

1)PN: 315bar
2)DN: 6,10,15,20,25,32,40mm
3)Connection Type: threaded, manifold mounted, flanged
4)Stainless steel materials

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

FLUID TEMPERATURE:-5 - 80 ℃
ORIFICE:50mm
CV Value:48

1) 2 way full bore
2) high pressure 315bar
3) DN 6~80mm
4) thread, flange, manifold mounting type
5) carbon steel materials

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.