Sensors

Multi-pin headers are often used in sensors applications, such as for rail industry.This industry requires rugged, moisture resistant sensors.

1.Use3PCSAAA dry battery (not include) 2.It will illuminate automatically when some one passes through
3.8pcs LED

Broadband SiC based UV photodetector in TO5 housing with concentrator lens cap, 0~5 V voltage output, peak wavelength at 280 nm

Broadband UVA+UVB+UVC, PTB reported high chip stability, Active Area A = 0,06 mm2,10mW/cm2 peak radiation results a current of approx. 780 nA

1.Use3PCSAAA dry battery (not include) 2.It will illuminate automatically when some one passes through
3.8pcs LED

• Broadband UVA+UVB+UVC, PTB reported high chip stability, for very weak radiation
• Radiation sensitive area A = 11.0 mm2
• TO5 hermetically sea

1.Use3PCSAAA dry battery (not include) 2.It will illuminate automatically when some one passes through
3.8pcs LED

FOP-MA is a fiber optic pressure sensor designed for use in acoustics or microphone applications or whenever a very sensitive pressure sensor is need.

The FOT-L-SD and FOT-L-BA are fiber optic temperature sensors perfectly suited for harsh environmental conditions

1.Use3PCSAAA dry battery (not include) 2.It will illuminate automatically when some one passes through
3.8pcs LED

The FOP-MH is a fi ber optic pressure sensor designed mainly for applications where extreme temperature conditions can be found

Broadband UVA+UVB+UVC, PTB reported high chip stability, for very weak radiation. 10μW/cm2 peak radiation results a current of approx. 140 nA

1.Use3PCSAAA dry battery (not include) 2.It will illuminate automatically when some one passes through
3.8pcs LED

The FOP-M is a fiber optic pressure sensor designed mainly for applications where high temperature conditions can be found

Broadband UVA+UVB+UVC, PTB reported high chip stability,10μW/cm2 peak radiation results a current of approx. 6,5 nA,Active Area A = 0,50 mm2

The FRI is a fiber optic refractive index sensor, ideal for refractive index measurement of fluids in chemical and food processing industry applicatio

The FOS-N is a fi ber optic strain sensor, ideal for composite material engi-neering research and civil-engineering applications

The FOD is a fiber optic linear position and displacement sensor that provides high accuracy, absolute measurements of position and displacement.

FOP-MA is a fiber optic pressure sensor designed for use in acoustics or microphone applications or whenever a very sensitive pressure sensor is need

Broadband SiC based UV photodetector in TO5 housing with attenuator, 0~5 V voltage output, peak wavelength at 290 nm