Valves are controlled by manpower. 5/2,3/2,5/3 way valves are normally designed from 1/8" to 1/2".
Hand-draw valves are normally installed near the operator.
Hand-pull valves are normally installed in the position little far from the operator
Hand-push valves are installed directly on the pipeline.
| Model | 4H210-06 | 4H210-08 | 4H230-08 | 4H310-08 |
| Working Medium | 40 Micron Filtered Air | |||
| Motion Pattern | Direct Drive Type | |||
| Effective Sectional Area | 14mm2(CV=0.78) | 16mm2(CV=0.89) | 12mm2(CV=0.67) | 25mm2(CV=1.4) |
| Joint Pipe Bore | G1/8 | Air Inlet=Air Outlet=G1/4 Exhaust=G1/8 | G1/4 | |
| Working-pressure Range | 0~0.8Mpa | |||
| Operating Temperature Range | 0~60℃ | |||
| Model | 4H310-10 | 4H330-10 | 4H410-15 | 4H430-15 |
| Working Medium | 40 Micron Filtered Air | |||
| Motion Pattern | Direct Drive Type | |||
| Effective Sectional Area | 30mm2(CV=1.68) | 18mm2(CV=1.00) | 50mm2(CV=2.79) | 30mm2(CV=1.68) |
| Joint Pipe Bore | Air Inlet=Air Outlet=G3/8 Exhaust=G1/4 | G1/2 | ||
| Working-pressure Range | 0~0.8Mpa | |||
| Operating Temperature Range | 0~60℃ | |||
.jpg)
.jpg)
.jpg)
