SILICONE RUBBER FIBERGLASS SLEEVING

fiberglass sleeving coated with silicone elastomer

　　This kind of fiberglass sleeving is manufactured by the non-alkali sleeving braded with fiberglass and coated with silicone elastomer ,then heated and vulcanized. It is of some dielectric, high heat-resistance (200℃), good elaslity and cold-resistance. It can be used for wiring insulation and as mechanic protection for electrical machinery and electrical appliances with high demand.

Temperature Classification: H
Standard: GB7115-86
　　
1．Appearance: sleeving smooth surface，clear and neat ends.
　　2．Length: usually as(1000+20)mm/(1000-10)mm , other continuous length should be made as requirement
3．Inside Diameter and Wall Thickness:(mm)

Nominal Size Tolerance Wall Thickness
1 2 3
0.3 ±0.05 0.20-0.30 0.15-0.30 0.10-0.30
0.5； 0.8 ±0.10 0.25-0.50 0.20-0.50 0.15-0.50
1.0 ±0.20 0.25-0.75 0.20-0.60 0.15-0.60
1.5 ±0.20 0.35-0.75 0.20-0.60 0.15-0.60
2.0 ±0.20 0.35-0.80 0.20-0.70 0.15-0.65
2.5；3.0 ±0.20 0.40-0.80 0.20-0.70 0.15-0.65
4.0；5.0；6.0 ±0.25 0.50-0.80 0.30-0.70 0.20-0.65
8.0 ±0.25 0.50-1.00 0.30-1.00 0.20-0.80
10.0 ±0.50 0.65-1.00 0.40-1.00 0.40-1.00
12.0 ±0.50 0.65-1.20 0.40-1.20 0.40-1.20
16；20 ±1.00 0.65-1.20 0.40-1.00 0.40-1.20

4．Breakdown Voltage:
Axes, 25mm electrode type
2752─1 2752─2 2752-3
23±2℃ 200±3℃ after dampening 23±2 ℃ 200±3℃ after dampening 23±2 ℃ 200±3 ℃
Breakdown Voltage（kV） Central value ≥7.0 ≥5.5 ≥2.5 ≥4.0 ≥3.0 ≥2.5 ≥2.5 ≥1.8
Lowest individual value ≥5.0 ≥3.8 ≥1.5 ≥2.5 ≥1.9 ≥1.5 ≥1.5 ≥1.1