FeCrAl Resistance Heating Wire
Best Selling products: 0Cr25Al5 resistance wire, Kanthal Replacing wire.
The FeCrAl 0Cr25Al5 Resistance Wire has been exported to America and Europe for long time, because of the outstanding quality. In order to increase the thermal stability and mechenical properties, we apply the double electro slag refining technique and special control inclusion technique. Meanwhile, rare earth element is used in the alloy, it increase the whole properties of the product, such as the maximum working temperature and working life.
The FeCrAl 0Cr25Al5 Resistance Wire has been exported to America and Europe for long time, because of the outstanding quality. In order to increase the thermal stability and mechenical properties, we apply the double electro slag refining technique and special control inclusion technique. Meanwhile, rare earth element is used in the alloy, it increase the whole properties of the product, such as the maximum working temperature and working life.
Our FeCrAl alloy wire and strip have outstanding thermal stability and mechanical properties by applying the following techniques:
1. Applying the double electro slag refining technique and special control inclusion technique.
2. Adding rare earth element: increase the FeCrAl alloy's whole properties, such as max working temperature and continuous working life.
The FeCrAl alloy wire and strip received favorable comments from Japan, US and Europe market.
The Kanthal replacing wire is produced with powder metallurgy, the max working temperature is 1430° C.
Properties below:
Max. Temp | Resistivity (20°C) | Density | Melting Point | Elongation | Accelerated life test (1400°C.h) | Number of Bends | Magnetic |
1430°C | 1.4-1.52u·Ω·m | 7.10g/cm3 | 1500°C | 16-33% | >80 | 7-12 | Yes |
800°C | 1000°C | 1200°C | |
1.03 | 1.04 | 1.04 |
Tensile Strength(Annealed) |
650-800N/mm2 |
FeCrAl Resistance heating Wire has high Resistive, low temperature coefficient of electric Resistive, high operating temperature, and good corrosion Resistive under high temperature, especially under the atmosphere containing sulfides. It possesses good oxidation and heat Resistive.This kind of Resistive wire is creep-resistant over a wide range of temperature, which is another of their important qualities.
FeCrAl Resistance heating Wire has several potential advantages, such as lower raw-material cost, superior oxidation Resistive, lower density, and lower thermal expansion coefficient than the Ni-base super-alloys.
FeCrAl Resistance heating Wire has less hot strength than nickel s but much higher melting point and lower price. After being heated the Resistive Wire's plasticity becomes bad, easy brittleness, not to be easy to weld. However, If can be reasonably used, also be a kind of ideal electric heating material.
FeCrAl Resistance heating Wires are made of iron chromium aluminum base s containing small amounts of reactive elements such as yttrium and zirconium. The high aluminum content, in combination with the high chromium content causes the scaling temperature to increase up to 1425 C (2600F ); Fe Cr Al Resistive Resistive Wire s also have excellent oxidation properties at 800-1300° C because of the formation of a highly protective Al2O3 scale.
FeCrAl Resistance heating Wire Applications:
FeCrAl Resistance heating Wire intended for prolonged operation at high temperature. It isused chiefly for heating elements in the electrical industry and wide range of high-temperature oxidation environments, such as industrial electric furnace, heating furnace, nuclear reactor, petroleum refinery and automotive exhaust system, household electrical appliance, electrical oven, electrical heater, infrared settings and far infrared ray device. Because ofFeCrAl Resistive Wire' ability to withstand oxidation, the it can be employed under high-temperature conditions, while their good ductility enables them to be processed into Resistive Wire and Resistive Wire by hot and cold working.
Available Specifications:
Wire Diameter: 0.1mm-5.0mm,
4 Gauge to 22 Gauge,
0.004 Inch to 0.2043 Inch
The attached file is detailed description of the Fe- Cr-Al alloy Resistance wire series' physical properties.
Wire Further Processing | Cut to length Wire |
Flat Wire | |
Square and Shaped Wire | |
Rewinding and spooling | |
Polishing and cleaning |
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).