/Xionghai magnet preparesits anisotropic powders by either casting an alloy melt into a mold, or strip casing. Strip Casting offers the advantage of better chemical stability. Subsequently, the ingot from the mold or the flakes from Strip Casting are pulverized to a uniform grain/particle size. The best method for obtaining the desired grain size is by HDDR. The HDDR [hydrogenation-decomposition-desorption-recombination] process yields a more homogenous particle size with a minimum of α-Fe, and Nd-rich phases. Anisotropic Nd-Fe-B, HDDR powders prepared from strip cast alloys are used for the HAST [Highly Accelerated Stress Test] grades of NdFeB Magnets, including N, H, SH, UH, EH, and AH grades.
Improved Corrosion Resistance:
The HAST protocol used on our neodymium iron boron magnets can qualitatively reflect the service life of the magnet. This test exposes the magnet to 130°C, 95% RH, at 2 ATM for more than one day. The magnet is massed before and after the test. Our magnets measure a weight loss of less than 5 mg/cm2.
The HAST protocol used on our neodymium iron boron magnets can qualitatively reflect the service life of the magnet. This test exposes the magnet to 130°C, 95% RH, at 2 ATM for more than one day. The magnet is massed before and after the test. Our magnets measure a weight loss of less than 5 mg/cm2.
High Maximum Working Temperature:
Our AH series of NdFeB magnets have working temperatures up to 230°C.
The Magnetic Properties of Neodymium Permanent Magnete Super Strong Magneti Neodimio Rare Earth Aimant Neodyme:
The Magnetic Properties of Neodymium Permanent Magnete Super Strong Magneti Neodimio Rare Earth Aimant Neodyme:
Magnetic Properties of Sintered NdFeB Magnets | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The Physical Properties of Neodymium Permanent Magnete Super Strong Magneti Neodimio Rare Earth Aimant Neodyme:
Parameters | Units | Indicators |
Density | g/cm³ | ≥7.3 |
Home temperature | ℃ | 310-340 |
BrReversible temperature coefficient | ℃/% | -0.100~-0.130 |
HcjReversible temperature coefficient | ℃/% | 0.40~0.70 |
Compressive strength | N/mm2 | 1050 |
Bending strength | N/mm2 | 250 |
Tensile strength | N/mm2 | 80 |
Webster Hardness | 600 | |
Coefficient of thermal expansion(20 to 200℃) | 10-6/k | ∥5⊥-1.5 |
Specific heat | J/(Kg.K) | 460 |
Thermal conductivity | W/(m.K) | 9 |
Resistivity | μΩ.cm | 150 |
Pictures of Neodymium Permanent Magnete Super Strong Magneti Neodimio Rare Earth Aimant Neodyme Disc / Disk/Ring: