.jpg)
1.Feature:
UHMW-PE has the following features: low friction coefficient, low waste frication, fabricate by itself, resisting sticking, resisting incrustation, corrosion proof, anti bounce, flexibility, resisting low temperature, aging resisting, standing high pressure, safety, light, so it has excellent physical and chemical characters and wide usage future and range. The pipe which made by UHPE can be used in the miner, food, chemical, coal etc. field. While as it is difficult to processing, so the making pipe efficient is low, so strain the development and usage of the pipe. Our machine can produce without stopping, improving the efficient greatly; lower the price to produce the pipe.
Our company Manufactures UHMWPE tubes, plates, bar and the production line has the following outstanding features:
1.A tractor serves several purposes: Only replace a few of components at this production line, it can manufacture other tubular products, plank stuff or steel bar. The largest diameter range of tubular product is 930mm,and the plank stuff's largest breadth can reach to 1220mmThe steel bar's maximum diameter can reach 200mm.
2.High molecular weight products: utilize the production line and our company’s prescription can extrude 3.5 million molecular weight of super-high polythene.The molecular weight of products is no less than 3 million; While molecular weight of products that the extruding molecular weight of 2.5 million super-high polythene is no less than 2 million.
3. Low-cost products, material purchasing convenient: our company’s own prescription, material purchasing easy and price low.
4.Easy to be operated, stable extrusion: special extruding system and control equipment make the operation easy, products extruding steady, even if power cut suddenly or other reasons lead the engine break-down, neither influence the following products extruding, reduce material wasting, saving time, enhancing efficiency and reducing cost.
5. Electrical device and other components standardization higher: adopt more standard components, change easier, lower-price; electric components all made in China, price lower, purchase convenient.
6. Excellent appearance: the special extruding system not only extrudes higher molecular weight material, but also presents excellent appearance of the products as smooth, inner stress low, even colour change process. The products chromatic aberration is small and the colour is well distributed.
2. Parameter:
UHMW-PE has the following features: low friction coefficient, low waste frication, fabricate by itself, resisting sticking, resisting incrustation, corrosion proof, anti bounce, flexibility, resisting low temperature, aging resisting, standing high pressure, safety, light, so it has excellent physical and chemical characters and wide usage future and range. The pipe which made by UHPE can be used in the miner, food, chemical, coal etc. field. While as it is difficult to processing, so the making pipe efficient is low, so strain the development and usage of the pipe. Our machine can produce without stopping, improving the efficient greatly; lower the price to produce the pipe.
Our company Manufactures UHMWPE tubes, plates, bar and the production line has the following outstanding features:
1.A tractor serves several purposes: Only replace a few of components at this production line, it can manufacture other tubular products, plank stuff or steel bar. The largest diameter range of tubular product is 930mm,and the plank stuff's largest breadth can reach to 1220mmThe steel bar's maximum diameter can reach 200mm.
2.High molecular weight products: utilize the production line and our company’s prescription can extrude 3.5 million molecular weight of super-high polythene.The molecular weight of products is no less than 3 million; While molecular weight of products that the extruding molecular weight of 2.5 million super-high polythene is no less than 2 million.
3. Low-cost products, material purchasing convenient: our company’s own prescription, material purchasing easy and price low.
4.Easy to be operated, stable extrusion: special extruding system and control equipment make the operation easy, products extruding steady, even if power cut suddenly or other reasons lead the engine break-down, neither influence the following products extruding, reduce material wasting, saving time, enhancing efficiency and reducing cost.
5. Electrical device and other components standardization higher: adopt more standard components, change easier, lower-price; electric components all made in China, price lower, purchase convenient.
6. Excellent appearance: the special extruding system not only extrudes higher molecular weight material, but also presents excellent appearance of the products as smooth, inner stress low, even colour change process. The products chromatic aberration is small and the colour is well distributed.
2. Parameter:
|
Model
|
FD-UHPE930G
|
|
Main extruder type
|
SJ-150/20
|
|
Screw diameter
|
Φ150
|
|
Screw of linear elements
|
special design
|
|
L/D Ratio of screw
|
20
|
|
Die diameter
|
Max.930mm
|
|
Output kg/h
|
10-20kg/h
|
|
Electric motor power
|
37KW
|
|
Speed timing type
|
Frequency control
|
|
Heat up mode
|
Cast aluminium of stove
|
|
Heat r zone of the barrel
|
5zone
|
|
Heat cylinder power
|
40kw
|
|
Cooling of Barrel
|
air Cooling
|
|
Cooling of barrel power
|
5x0.37kw
|
|
Heat zone of the die
|
5zone
|
|
Moulding mode
|
by cycle water-cooling
|
|
Products specifications
|
Φ63-Φ930
|
|
Line speed
|
0-400mm/h
|
|
Centre height of extruder
|
1210mm
|
.jpg)
