Two working station armature rotor dynamic balancing and testing machine
This type armature dynamic balancing machine has two working stations. One is used for testing, the other one is used for balancing.The balancing method is weight removing. The mechanical arm will carry the rotor from the first working station to the second one. It is of high efficiency and stable performance. The rotor balancing and testing Machine is simple to operate and tooling change is easy. After preset in the touch screen, machine will do balancing automatically once start button is pressed.
Technical specification:
Item | Remark |
Main configuration | Cylinder:SMC |
Servo motor: Mitsubishi | |
Sensor:KEYENCE, OMRON, KORI | |
Touch screen: Schneider | |
PLC: SIEMENS | |
Stepping motor: Oriental motor or SANYO | |
Armature range | Weight: less than 1.6Kg |
Lamination length: 20-60mm | |
Diameter: 25-40mm (II type machine) 40-60mm (III type machine) | |
Balancing speed | 1000-2200RPM |
Cutting method | R shape cutter or V shape cutter Cutting depth and length could be controlled |
Power source | AC380V 50Hz |
Air source | 0.4~0.6Mpa |
Initial unbalance value | Depends on armature diameter and cutting depth, for example, 32mm armature, single cutting position ≤500mg,,40mm armature, single cutting position≤500mg |
Pitch time (R type cutter) | 12~14 S/PC (balancing, one time cutting each for left and right side) |
Pitch time (V type cutter) | 15~17 S/PC ( balancing, one time cutting each for left and right side) |
Residual unbalance value | Chinese standard 6.3 Grade |
Machine dimension | 2000 X 1000 X 1800mm |
