High Temperature Resistant Propeller Mixer Hyperboloid Submersible Type Easy Maintenance
Features:
1. Simple structure and easy for installation and maintenance.
2. Used especially for the water treatment such as mixing of waste water and chemical agents.
3. The installation depth should not exceed 10m.
4. The type selection of hyperboloid mixer is related to the pond,medium parameters and installation mode.
Application:
Hyperboloid mixers are widely applied in environmental protection, energy and light industry where the solid, liquid are interflowing, especially in the sewage treatment process of coagulative precipitation tank, equalization pond, anaerobic pond, and denitrifying pond.If the mixer is dry type installation, it's especial suit for the environment with high temperature.
Model Description:
Construction:
The MH hyperboloid mixer is composed of transmission part, impeller, base and hoisting system. Hyperboloid agitator can be divided into dry-type.
Dry-type hyperboloid agitator is composed by motor and speed reducer, shock-absorbing seat, stirring shaft, hyperboloid impeller, electric cabinet (optional), Walkway Bridge (equipped by user) and so on.
Performance parameters:
| TYPE | Impeller diameter | Speed(r/min) | Power(kW) | Service area (m) |
||
| Standard | Range | Standard | Range | |||
| MH | 500 | 76 | 40-250 | 1.1 | 0.75-1.5 | 1-3 |
| 1000 | 55 | 30-80 | 1.5 | 1.1-2.2 | 2-5 | |
| 1500 | 38 | 30-60 | 2.2 | 1.5-3 | 3-6 | |
| 2000 | 33 | 20-42 | 3 | 2.2-3 | 6-14 | |
| 2500 | 27 | 20-40 | 5.5 | 3-5.5 | 10-18 | |
| 2800 | 24 | 20-30 | 7.5 | 4-7.5 | 12-22 | |
Fluid figure:
Service and Maintenance:
-
It is required to replace gear lubricating oil and clean up the inside oil contamination after the new motor has operated for 200 to 300 hours. You can replace them later within six months to one year.
-
Please refer to the manufacturer’s operating manual for the use method of gear motor.
-
Regularly check whether the rotating parts have unusual sounds and there exists temperature rise.
-
Regularly check whether the current has anomalous change.
Typical project:( 8 Sets):
